Sometimes the the control fork comes off of the control valve. Need to make sure the valve is moving when you move the quadrant.
If it did come off, they can be a bit tricky to get back on. Need to remove both side covers and using two hands, one from each side, spread the fork and reinstall onto the control valve tee.
Quoting Removed, click Modern View to see
Your control valve could have trash in it from running "filthy fluid". Trash inside the valve can make it stick so it does not move in and out to control the flow of hydraulic fluid to the ram cylinder.
If the valve is stuck, sometimes they will free up with the fluid change you did. Sometimes it can mean dropping the pump for disassembly and cleaning.
Need to determine why the lift isn't working first.
Is the pump turning?
Is the fork off of the valve?
Is the valve stuck / sticking?
Is there major leakage from the ram cylinder above?
If your fork is on and trying to move the control valve, you can try "helping" to free up the control valve by hand, through one of the inspection covers.
Upload one or more videos to your post. Photo and video filesizes should be less than 8MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Chores - by Frank Young. The ceaseless passing of time! It is at once our friend and our enemy. It measures our progress and it makes us old. Like most features of our life, few things are all good or all bad, and most such judgments depend on our own perspective or viewpoint. In our particular hobby, we enjoy the nostalgic return to the days of our youth as we recreate many of the scenes that took place on the family farm that served as the stage for the first few acts of the play that is our live
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.