I'd think a photo capture would be about as accurate as you could get. About 20 years ago I had the exact same situation but was a rubberized paper gasket material. The part that took the longest was getting information from the gasket material maker that the material would not catch fire and smoke and foul up the lenses of the laser. Once we had that I had my ten new perfect gaskets the next day. I had a round pipe flange gasket, with 6 smaller holes that just touched the outside edge of the OD, but did not break through. Any kind of punch or hard tool pulled or moved the gasket material and ruined the gaskets. A waterjet was going to be my last resort, but still has tool pressure. The QA inspector came up to my cubical and congratulated me on buying a perfect example of an almost impossible to make part.
I would caution you on lasering cork, it's a decayed tree bark, possibly flammable, and brittle. Plus it's a TERRIBLE gasket material. Bend it slightly and it breaks. A cork filled rubber composite is a good gasket material.
I absolutely hated the cork valve cover gaskets on my small block Chevy in my first car. Oil pan gasket was a leaker too.
Upload one or more videos to your post. Photo and video filesizes should be less than 5MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.