Looked over the Reliance data and the Deere data. Both say to run a minimum of 100 hours before changing oil.
Deere says to break in with heavy loads with minimal idling.
-
Reliance (After the run in procedure) says to not allow the engine to idle for more than 5 minutes or operate for extended periods of time with little or no load during the first 100 hours.
If you couldn't read Reliance, I blew it up for the initial run in period which they say preferably do on a Dynamometer.
1. 1 minute, no load, low idle.
2. 2 minutes, no load, high idle.
3. 5 minutes, 50% load, 2000-rated speed.
4. 10 minutes, 50-75% load, 2000-rated speed.
5. 10 minutes, 75-100% load, rated speed.
6. 2 minutes, no load, 1500 rpm.
If I can't hook up an implement on my 2606, it looks to me like the only way I can simulate load is to drive around in different gears. Not sure which gear has more load, low or high?
Guess I'll look around for the Lucas additive and then avoid idling for a 100 hours and spend 2 weeks driving around the section at various speeds (or not and just do the best I can).
Upload one or more videos to your post. Photo and video filesizes should be less than 8MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Chores - by Frank Young. The ceaseless passing of time! It is at once our friend and our enemy. It measures our progress and it makes us old. Like most features of our life, few things are all good or all bad, and most such judgments depend on our own perspective or viewpoint. In our particular hobby, we enjoy the nostalgic return to the days of our youth as we recreate many of the scenes that took place on the family farm that served as the stage for the first few acts of the play that is our live
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.