I've had GREAT success with Mr. Gasket clear glass, actually Pyrex tube with a nylon mesh filter, two diecast zinc with chrome plating ends with 1/4, 5/16, or 3/8 hose barb ends. The mesh is so small they even filter out water from gasoline. All kinds of dirt too, plus the pyrex is clear, the nylon filter is white, easy to see when the filter needs cleaning. I've had one with 3/8 hose barbs on my Super H for about 20 years, I've cleaned it once because I had it apart working on the gasline. I first used one on my 1973 OSSA 250 Six Day Replica enduro bike, it had a Mukuni carb. Ossa is Spanish, Europe put fuel filtration in the carb. Japan (Mukuni is Japanese) puts fuel filtration in the gas tank. Jap carb Spanish bike, no fuel filter, when the fiberglass tank lining started pealing the carb plugged constantly, the Mr. Gasket stopped it. I put one on my Cub Cadet to replace the sediment bulb that let anything smaller than a hay bale through. The Mr. Gasket filter never really got that dirty, cleaned it twice in 15-20 years, once because it strained enough WATER out of the gas to fill the filter and stop gas flow. You could see the line between the gas & water as it filled over the summer. I get them from SUMMIT RACING, about $12 each. I wouldn't buy a cheap imitation. I first read about them in HOT ROD magazine in the 1970's.
Upload one or more videos to your post. Photo and video filesizes should be less than 5MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.