Posted by MARK ROBKE on June 09, 2021 at 12:28:52 from (173.191.16.180):
In Reply to: Re: 641 Ford posted by Metal Man on June 09, 2021 at 11:02:16:
Well your question is how to free up the shift rail, not so much how to keep water out. You will need to remove the rail from the housing. I am not familiar with that tractor specifically, but usually you remove the bolt in the shift fork and slide the rail out. In your case you may need to drive it out with a hammer and punch. There may be a welch plug at the end of the rail's travel in it's bore that will drive out also. Do not lose the detent ball and spring. There also could be an inter lock between the shift rails-anther detent ball on the side of the rail in the cover. So do not lose anything. Clean the rail with sand paper and it's bore and reassemble. You should replace the welch plugs with new-NAPA should have them- and reseal with silicone. The detent spring and ball probably are held in with a welch plug also. If the rails are not located in the top cover but in the case below, then the tractor would possibly need to be split. Good luck, Mark.
Upload one or more videos to your post. Photo and video filesizes should be less than 5MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Chores - by Frank Young. The ceaseless passing of time! It is at once our friend and our enemy. It measures our progress and it makes us old. Like most features of our life, few things are all good or all bad, and most such judgments depend on our own perspective or viewpoint. In our particular hobby, we enjoy the nostalgic return to the days of our youth as we recreate many of the scenes that took place on the family farm that served as the stage for the first few acts of the play that is our live
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.