Tractor Talk Discussion Board |
Re: International super M disaster
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Britt on May 31, 2003 at 08:07:00 from (65.178.179.6):
In Reply to: International super M disaster posted by Ray,IN on May 30, 2003 at 19:27:57:
Sorry to hear about the problem. In addition to the bell housing, I would check the transmission input shaft. It probably got bent before it pulled loose from the clutch plate. I would get a dial indicator and check the shaft for straightness. I am not familiar with the Super M transmission, but the input shaft probably has needle bearings in the bore on the backside of the shaft. These needle bearings need to be inspected/replaced also. Also inspect/replace the clutch, pressure plate, pilot and throw-out bearings. Now is the time to do it as long as the tractor is apart. The clucth disk center is probably warped or cracked and probably will need to be replaced. Possibly some enterprizing individual will design a beef-up kit for this problem. Good Luck.
Follow Ups:
Home
| Forums
Today's Featured Article -
Chores - by Frank Young. The ceaseless passing of time! It is at once our friend and our enemy. It measures our progress and it makes us old. Like most features of our life, few things are all good or all bad, and most such judgments depend on our own perspective or viewpoint. In our particular hobby, we enjoy the nostalgic return to the days of our youth as we recreate many of the scenes that took place on the family farm that served as the stage for the first few acts of the play that is our live
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|