Tractor Talk Discussion Board |
Re: starter/solenoid
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Gary-Miss on January 01, 2004 at 07:32:56 from (64.12.96.236):
In Reply to: starter/solenoid posted by Gus on January 01, 2004 at 07:09:55:
Several things to look at here. A starter mounted solenoid takes about 30 amps to pull it. The wire that energizes it goes from the battery to the starter switch and then back to the solenoid. It will still show an amperage draw in energizing the electromagnet in the solenoid, but, it won't pull the plunger. On racecars, big trucks, combines, etc, we use a Ford type solenoid which has a small current draw. Move the battery cable to it, run a cable from it to the starter solenoid, jump from the big post to the solenoid post. I take a piece of copper tubing, hammer one end real flat so it will be wide, the other end slightly flat so it will still be narrow, drill a 3/8 hole in one end and a 1/8 hole in the other to use as a jumper on the starter mounted solenoid. By the way, don't forget to move the big feed wire from the old solenoid also. Sometimes, your old solenoid will be dirty at the plunger. Pull the solenoid off and clean the plunger and the bore. Dry both of them good. DO NOT use any oil. The plunger will stick. It must be dry. Good luck.
Follow Ups:
Home
| Forums
Today's Featured Article -
Chores - by Frank Young. The ceaseless passing of time! It is at once our friend and our enemy. It measures our progress and it makes us old. Like most features of our life, few things are all good or all bad, and most such judgments depend on our own perspective or viewpoint. In our particular hobby, we enjoy the nostalgic return to the days of our youth as we recreate many of the scenes that took place on the family farm that served as the stage for the first few acts of the play that is our live
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|