Tractor Talk Discussion Board |
Re: looking for timing info for a continental 6cyc
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Bob on May 05, 2005 at 21:05:27 from (66.163.134.177):
In Reply to: looking for timing info for a continental 6cyc posted by Ian on May 05, 2005 at 17:06:34:
If it really has a magneto, (and especially if it is hand-cranked), you do NOT want the impulse to snap before TDC, (at least not much before TDC) or you risk kick-back, and a busted arm. In the absence of any factory specs, set the impulse to snap just a hair after TDC. With a magneto, when the impulse is active during cranking, the spark is retarded 20 to 30 degrees. As soon as the engine "catches" and speeds up, the impulse drops out, and timing jumps 20 to 30 degrees advanced, all at once, which is "running timing". The exact figure is determined by how the engine manufacturer spec'd the magneto. So, with a mag on a hand-cranked engine, timing at cranking is critical, and if that is set correctly to just after TDC (or whatever the engine builder specifies), running timing should be correct, too. For some other ideas, click below:
Follow Ups:
Home
| Forums
Today's Featured Article -
The Rescue of a Fordson F - by Anthony West. Introduction I live in the UK and have for many years restored Fordson tractors (in the main model N's). I have also restored and shown model F's, E 27N's, Field Marshall Series 2, David Brown Cropmasters and the old rey Fergeson T 20. At one time I had seven restored examples which were shown and used in ploughing matches. As most restorers, I have a number of war stories I can relate on a range of topics that may help other like minded and interested people. Perhaps my first p
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|