Tractor Talk Discussion Board |
Re: Rebuilding a hydrostatic trans.
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Rod F. on May 28, 2005 at 09:24:10 from (142.177.109.15):
In Reply to: Rebuilding a hydrostatic trans. posted by Hurst on May 27, 2005 at 15:44:12:
Hi Hurst, There is a lot to be said for the comments that Gene has made. Hydrostat repair is often considered a speciality job. That said, I know where you're coming from on cost. Something sounds a little queer though. You say that reverse keeps getting faster, and forward slower, and you can't adjust any more? You aren't simply adjusting the pedal or control linkage are you? With a hydrostat, you are just moving the swash plate in an axial piston pump, and the linkage must be centered. You may actually be able to move the pump plate further than the linkage would normally allow when properly adjusted. I know this is the case in my skidsteer. Check that out before condemning the pump. Also, since you seem interested in these things, I'll make one other suggestion to you. Contact mother Deere, send them some money, and they will send you an excellent reference publication titled John Deere, FOS (Fundamentals of Service) Hydraulics. The have many FOS books. I have Hydraulics and Electrical Systems. I know there are many more. I've never been a big fan of Deere equipment, but they do publish and excellent general reference training manual. It might be some of the best money you ever spend. Just a thought to keep in mind, if you don't already have a copy. Have fun. Rod
Follow Ups:
Home
| Forums
Today's Featured Article -
The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|