Tractor Talk Discussion Board |
air in hydraulics
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by cheinzle on July 06, 2005 at 06:57:10 from (207.5.113.189):
I have a live hydraulic system that I installed on a non-live hydraulic tractor. The system consists of a cog-belt driven pump, spool, 3-pt cylinder and resivoir as follows: tank->filter->pump->spool->cyl->spool->tank Im having trouble with air in the cylinder, causing slow response on lifting, and sudden jerky motion when letting the cyl down under load. Ive unmounted the cyl and held the ports high in an effort to get the air out to no avail. Ive also removed the return line from the tank and run it through a section of clear hose to watch for air. during open-center operation (no levers pulled) the oil looks clean and clear, with no visible air passing through. when the cylinder is cycled down under load, large burps of air pass through the hose. Any ideas on the culprit?
Follow Ups:
Home
| Forums
Today's Featured Article -
George's Fordson Major - by Anthony West (UK). This is a bit of a technical info to add on to the article about George's Major in the "A Towny Goes Plowing" article. George bought his Major from a an implement sale about 18 years ago for £200.00. There is no known history regarding its origins or what service it had done, but the following work was undertaken by Harold alone to bring it up to show standard. From the engine number, it was found that the major was produced late 19
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|