Tractor Talk Discussion Board |
Re: Greatly needing help with key switch for 1967
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by One way... on November 29, 2005 at 17:28:48 from (4.224.225.156):
In Reply to: Greatly needing help with key switch for 1967 Ford posted by K-9 Cattle Ranching Syste on November 29, 2005 at 17:08:47:
...is to run a jumper from the POS battery cable to the POS terminal on the coil(should be marked). Then take a pair of channel lock pliers and jump the two terminals on the starter solenoid on the fenderwell. Caution! Sparks may fly but it should turn the engine over. If you want to just turn it over then leave the jumper off. If it starts(with jumper) then remove to turn it off. May want to take the fuel line loose from carb and run a rubber hose to a can to let the crud in tank get out before you try to start it. Clean up any gas spills before attempting to "jump"!
Replies:
Home
| Forums
Today's Featured Article -
The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|