Posted by trucker40 on March 13, 2008 at 14:58:20 from (69.152.169.171):
In Reply to: Re: Won't start day3 posted by trucker40 on March 13, 2008 at 14:42:13:
Im fairly sure you have it wired wrong by your picture.Firing order is not 1,2,4,3 is it?If it is all you need to know now is if the rotor is pointing to number one when at TDC or whatever your marks are.You might try and take out number one spark plug,look in the cylinder or take a screwdriver and put in there and have somebody turn the crank with a wrench,when the screwdriver is up all the way,but not started back down,thats TDC.Top Dead Center,also you need to be on the compression stroke,then look at your marks,if they are lined up as you describe and you have the wiring order right,pertaining to clockwise,and clean your plugs(might try heating them up with a propane torch to burn the gas off),it should fire.I dont know what all you have done to the motor,but if the valves arent adjusted right might be a problem.The plugs being wet says its drawing gas in so if you get fire at the right time in the right order should run.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - New Life for an Old Allis - by Tyler Woods. My friend Jon, has an old '39 Allis Chalmers B. He thought it a marginal tractor that had long since served its time. She smoked terribly and never had much power but he couldn't afford another so he was limping along with what he had. Jon's Allis has a small front loader and though it doesn't carry much, it serves his needs. It was the hard starting and low power that made him think it was time to replace the old girl. Jon called me to help him discover why his tractor wouldn't start
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.