Gene , I use a Stihl 032 saw with 16" bar, I use only Oregon chain and the method I use is to clamp the bar in a vise, and follow the guide mark that Oregon stamps into the top of the tooth I will even give a new chain a lick or two as machine sharpening can be improved upon. I only cut red oak and hard maple and like to see big chips , not saw dust . when you have your teeth proerly sharpned your saw won't need any downpressure at all , just the angle of the properly sharpened teeth will pull itself into the logand you will feel the difference in the performance. Ishapen my chain every tankfull, I take a break and let it cool down and then adjust the chain tension, and then file . Any time you feel that your saw is not pulling itself into the work you may as well stop and sharpen . Ifile the rakers maybe every 5 6 times that I sharpen teeththen they only need a couple of licks . don't get carried away fileing rakers cuz you may run out of power and your saw will get 'grabby'. Turn over your bar with every new chain and your sprocket too if you can on your particular saw It's real easy to do , once you do it a few times. If your saw wants to bind and cut a curve then your teeth are sharper on one side than the other, then you may want to take your chain to some one with a machine the get them evened out tho if you study the teeth you'll see what you need to do . good luck!gh PS, I use chisel chain.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
