Posted by trucker40 on April 30, 2008 at 17:43:15 from (69.150.232.217):
In Reply to: 640 VALVE GUIDES posted by BLINDHAWG on April 30, 2008 at 16:35:36:
ok Im not an expert on gas Ford motors,but I have replaced valve guides on diesel motors and I saw where nobody has answered yet so I will try.Looks to me like somebody put a different type of valve guide in there.An insert inside of the real valve guide.Also I saw where you posted before and the ones in your picture looked to be the wrong ones.Now I remember that a bunch of Ford motors had replaceable valve guides.As you described in your first post they had a ring to stop them.I think you need those kind.If you have those kind of guides,you take a air hammer,and you could have to make a tool or buy a tool for the air hammer and drive them out from the bottom,make sure the head is clean and drive in new ones.Thats what replaceable valve guides mean to me,I could be wrong.I also remember that there is a way to put brass valve guides in(which is what I think that insert is inside of your valve guide that you are talking about.These I think are screwed in and maybe are replaceable too.Another thing that was done was called knurlizing which was kind of like running a tap through the guides and cutting a sort of thread which raised the inside diameter and tightened the valve stem up in the hole.This was the cheap way out and worked for a while.Most people that have something like that break down and want it fixed yesterday.So there is no telling what was done to it.The right way is what you asked about before,I think you need ones like came out.I think it would last a long time if you did it that way.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Chores - by Frank Young. The ceaseless passing of time! It is at once our friend and our enemy. It measures our progress and it makes us old. Like most features of our life, few things are all good or all bad, and most such judgments depend on our own perspective or viewpoint. In our particular hobby, we enjoy the nostalgic return to the days of our youth as we recreate many of the scenes that took place on the family farm that served as the stage for the first few acts of the play that is our live
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.