Here's what the net says... and the link has more Q&As
How do you change the spark plugs on a 2001 mazda tribute and what gaskets etc are required? In: Mazda Tribute [Edit]
Answer If you have a v6 engine, you'll need a size 8 socket. First remove the three screws that hold the black cover on top being careful to not drop them. Next, you'll see the first 3 plugs with wires attached to them. These are the distributors for each plug. unplug them by squeezing the ends of the caps and pulling them off straight to the side. You will now loosen the distributor caps with the number 8 socket w/ extension and pull off the cap. You will find the spark plug under them which requires the small spark plug socket and extension. Do this one at a time with the engine cooled down otherwise it makes it difficult to unloosen them. Reverse the process to install them. Finally you'll have to undo some of the top manifold and some of the hoses to find the other 3 towards the middle of the engine closest to the firewall. You shouldn't need any gaskets as long as you are careful when pulling the top plastic manifold off. Be organized and remember where all the screws go when reinstalling the manifold and vacuum hoses back to the original areas. I did mine and took only about 15 minutes. Good luck!
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Gatherin of the Orange - by Rick Nikolich. In July of 1998 I was talking to fellow Allis Chalmers collector Mike Schilling about the annual "Gathering of The Orange" AC show coming up in August of 1999. He got this wild idea that we should get a convoy of AC tractors and drive them from Charlotte, Michigan 105 miles to LaGrange, Indiana.
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
