Posted by 02XLT4X4 on July 23, 2008 at 08:12:33 from (69.63.98.126):
In Reply to: how stuck is stuck? posted by 02XLT4X4 on July 22, 2008 at 17:00:05:
02XLT4X4 said: (quoted from post at 17:00:05 07/22/08)
johndeereman said: (quoted from post at 12:40:01 07/22/08) dc tom on the case board has a unique way of doing this he takes another tractor and backs up along side of it and runs a hydraulic hose to a spark plug hole use one that is mid stroke as it will not roll it over tdc or bdc this way
We have done that as well, we use a old two cylinder John Deere that doesn't have a whole lot of pressure though.
Soaking (we use brake fluid) and trying to crank/rock/pull them usually works, we use the hydraulic method as a last resort.
You have to be carefull, but usually it works pretty good. Our only casualty so far was a headgasket on a Oliver 88 diesel, and it was SHOT to start with.
If you have a smoker you pull it apart and fix it, just like you would have if you went down that route to start with. So far aside from the Oliver that sat outside with the exhaust open and had a royally trashed engine to start with out of about 10 tractors they all came out running great.
I forgot to mention that it is always a good idea to remove the rocker arm assembly while trying to beak an engine loose, and you will know if you will have to pull the head off any for valve work.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Talk of the Town: The Saga of Grandpa's Tractor - by The following saga is from the Tractor Talk Discussion Forum. Someone. The saga starts with the following message: Hey guys I have a decision to make. I know what you all will probably suggest and it will probably agree with me way down inside, but here it is. I have a picture blown up and framed in my "tractor room" of a Farmall M. It was my Grandpa's tractor, of which whom I never got to meet. He froze to death getting this tractor out of the barn to pull a truck out of the ditch before I was born. Anyway my dad and aunt had to sell it at the auction,
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.