Posted by Shetland Sheepdog on June 28, 2009 at 16:54:42 from (72.64.14.134):
In Reply to: Hay Wagon Deck posted by DH in Carolina on June 28, 2009 at 09:29:06:
I used 1-1/2 inch angle iron 1/4 inch thick with a half inch bolt each way, but I used 2x5 oak for the cross pieces, not 4x4's, and the stringers are 3x7 oak. the size and thickness of the angle iron was probably overkill, but it's what was available at the time. You could probably be fine with 1 inch angle 3/16's thick. Another consideration might be to use two 3/8 inch bolts through the stringers instead of one 1/2 inch bolt. My cross members are 3 feet on center. closer might be better depending on what you plan to use for decking. I will be using 1.5 inch rough cut oak actually 1.5 inches thick. I had to do a little "tweaking" with the stringers as they warped and twisted as they dried. The only other suggestion would be to forget the 4x4's, because they may bow down at the outer ends! BTDT.
Rebuilding the deck for a kicker rack -- progress to present
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Talk of the Town: The Saga of Grandpa's Tractor - by The following saga is from the Tractor Talk Discussion Forum. Someone. The saga starts with the following message: Hey guys I have a decision to make. I know what you all will probably suggest and it will probably agree with me way down inside, but here it is. I have a picture blown up and framed in my "tractor room" of a Farmall M. It was my Grandpa's tractor, of which whom I never got to meet. He froze to death getting this tractor out of the barn to pull a truck out of the ditch before I was born. Anyway my dad and aunt had to sell it at the auction,
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.