Posted by MHMalcolm on August 30, 2009 at 13:55:29 from (66.66.148.252):
In Reply to: M-5 BUSH HOG? posted by jose bagge on August 30, 2009 at 13:20:40:
M5 was the model of a Woods rotary cutter. The 5 stood for 5 foot cutting width. The yellow color makes sense because Woods rotary cutters are painted kind of a dark yellow. The front half of the PTO shaft would be the same length as the rear half. I can probably supply the shaft you need if you can give me the length of the rear half from the front of the shaft back to the center line of the U-joint bearing cap that is pressed into the yoke that is welded to the shaft. I would also need to know if the retainer rings that hold the U-joint bearing caps into the yoke are on the outside of the cap or if they are on the other side of the cap where they are hard to see. Also, make sure the inside is actually square and not rectangular. It might be 1 1/4" x 1 3/8". My email is open if you are interested.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Chores - by Frank Young. The ceaseless passing of time! It is at once our friend and our enemy. It measures our progress and it makes us old. Like most features of our life, few things are all good or all bad, and most such judgments depend on our own perspective or viewpoint. In our particular hobby, we enjoy the nostalgic return to the days of our youth as we recreate many of the scenes that took place on the family farm that served as the stage for the first few acts of the play that is our live
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.