If it is rear disc like my 99 you will need tools to remove the brake calipers and yes you will need to remove to diff cover and remove the axle clip after rmoving the carrier pin bolt and carrier pin as it is a semi-floating axle. Removing the axle bearings, at least on mine was horrible. I tried with a slide hammer - probably had the wrong adapter in - and the race pretty much shattered. I had to use a die grinder to carefully grind a split down to the o.d. As for a damaged axle - I doubt there is any way aroud that. I couldn't imagine trying to perform your repair on the "open road" without a pretty decent set of assorted tools and clean-up supplies. Please note: if you have a limited slip carrier you will need to use synthetic 75 weight gear lube and LS additive and the capacity, at least on my truck, was measured to a depth from the fill hole not level to it (my new diff cover fill hole was at the right fill level - unsure what year they "brainstormed" that one).
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Chores - by Frank Young. The ceaseless passing of time! It is at once our friend and our enemy. It measures our progress and it makes us old. Like most features of our life, few things are all good or all bad, and most such judgments depend on our own perspective or viewpoint. In our particular hobby, we enjoy the nostalgic return to the days of our youth as we recreate many of the scenes that took place on the family farm that served as the stage for the first few acts of the play that is our live
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.