Tractor Talk Discussion Board |
Re: Using Digital Tachometer/Dwell Meter on Tractor???
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by IHank on March 11, 2001 at 00:11:33 from (207.177.47.161):
In Reply to: Using Digital Tachometer/Dwell Meter on Tractor??? posted by Steve in MD on March 09, 2001 at 21:34:18:
Steve- Check your system ground polarity. If it is positive ground you probably need to connect the tach/dwell meter signal line to ground and the ground line to the points side of the coil. At to the point settings, remember the 66% rule- Dwell should be 60 degrees for 4 cylinder systems, 37 degrees for 6 cylinder systems, and 26 degrees for 8 cylinder systems. If you got a system that's been converted from 6 volt positive ground to 12 volt nagative ground, the coil primary connections need to be reversed from stock, so the spark polarity comes out right. Good luck, IHank
Follow Ups:
Home
| Forums
Today's Featured Article -
Chores - by Frank Young. The ceaseless passing of time! It is at once our friend and our enemy. It measures our progress and it makes us old. Like most features of our life, few things are all good or all bad, and most such judgments depend on our own perspective or viewpoint. In our particular hobby, we enjoy the nostalgic return to the days of our youth as we recreate many of the scenes that took place on the family farm that served as the stage for the first few acts of the play that is our live
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|