Going 10" deep you are going to be limited by horsepower and traction. You will need a heavy offset plowing disc,with at least 28-30+"diameter blades to get in 10" in the soil mixture/root mat you have to cut. The biggest you will be able to pull sucessfully at 4-5mph is about a 10 ft on the 110 HP tractor, and maybe a 8 footer on the smaller tractor.I can spin out a dualled up/heavily weighted 4960JD with an 18 foot Tatu with 36 in blades in similar soil. Here's a horsepower chart for the heavy off set Tatu discs
Number of Disk Blades Working Width ft. in. (mm) Disk Blade Dimensions Disk Blade Spacing Weigth per Disk lbs (kg) Approx Net Weight* lbs (kg) Tractor Drawbar Horsepower** 10 5' 10" (1,800) 36" x 12mm 673 (305) 6,733 (3,054) 130 - 140 12 7' 3" (2,200) 38" x 12mm 17 5/16" 625 (283) 7,500 (3,402) 145 - 155 16 10' 2" (3,100) and (440mm) 660 (299) 10,553 (4,787) 205 - 220 20 13' 1" (4,000) 40" x 12mm 660 (299) 13,198 (5,986) 260 - 280 *Approximate Net Weight with 36" x 12mm disk blades
Taking all this into account, with both tractors,you might get over 40-50 acres in a 10 hr day,and $70/hr is not out of the question. Figure $12+hr for operator,$30/hr for fuel and maintenance, another $10/hr to cover breakdowns,wear and tear, then add in something for equipment depreciation, and add some some margin of profit ($7-$10/hr),if you don't tear a $900 tire
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Gatherin of the Orange - by Rick Nikolich. In July of 1998 I was talking to fellow Allis Chalmers collector Mike Schilling about the annual "Gathering of The Orange" AC show coming up in August of 1999. He got this wild idea that we should get a convoy of AC tractors and drive them from Charlotte, Michigan 105 miles to LaGrange, Indiana.
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
