Posted by Janicholson on October 16, 2010 at 12:33:16 from (67.72.98.45):
In Reply to: Knife sharpening?? posted by dave2 on October 16, 2010 at 12:03:09:
Always work with real steel knives, cheap will not sharpen. Four items: Hold the blade at a continuous angle on the stone. thickness of a nickle at the distance of a nickle diameter for skinning, a nickle and dime for general purpose, two nickles thick for rough utility. Make sure the angle is smoothly changed to round the tip with that angle.
Use a circular motion (non directional and varied) for roughing the edge, then only in the cutting direction with much lighter pressure when finishing the edge.
Use three grades of stone for real sharp knives. A 350 to 400 grit, a 600 to 800 finisher, and a hard Arkansas stone to get it shavable. Use Three-N-One thin oil on all stones flooding the process. Wipe the stone when finished. Use the whole stone to keep it flat.
Always pull the finished edge backwards on both sides against a leather strop (plain leather is fine) to remove the fine burrs remaining on the edge. This "wire edge" makes it feel sharp, but is just raggedness, and should be removed by bending the burrs off. Good luck, Jim
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Chores - by Frank Young. The ceaseless passing of time! It is at once our friend and our enemy. It measures our progress and it makes us old. Like most features of our life, few things are all good or all bad, and most such judgments depend on our own perspective or viewpoint. In our particular hobby, we enjoy the nostalgic return to the days of our youth as we recreate many of the scenes that took place on the family farm that served as the stage for the first few acts of the play that is our live
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.