Posted by LOU from Wi. on February 09, 2011 at 18:51:55 from (174.124.110.80):
In Reply to: Hydraulic Dump Bed?s posted by 1941FarmallAboy on February 09, 2011 at 16:03:02:
Farmall boy, We went thru the same troubles you have went thru, we bought a used 75 Ford 1 ton, took the old cattle box off, doubled the frame for strength, and set up a pivot for a dump box.Now after a while of using it as a standard fixed bed, we looked at PTO pump for the transmission, a scissor lift, and various other concoctions,but went for our route. Which is buy a single acting pump,motor and tank thru Dalton Hydraulics, get two hydraulic cylinders(single acting)from our 706 when we re did the loader arm assembly, and appropriate hyd. hoses and wiring. I will post a picture of ours,and must say, it is easier using a dump bed than having to manually unload the material from the bed by hand.Hope this helps,and if you need additional information, we will be glad to help. LOU & Victor
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.