Welcome! Please use the navigational links to explore our website.
Company Logo (800) 853-2651 Shop Now
   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Ford 600 - Featured Tractor

The Ford 600 model tractor was produced in 1954, 1955, 1956 and 1957 in Highland Park, Michigan. It has a 132 ci engine with 31 horsepower.

Recent Topics

  • Ford 600 stalling - Good Day Everyone I have a 1957 ford 600 I have replaced the carb, converted it to 12 volts, installed a new distributor and changed to electronic ignition. It stalls when going forward and I have to restart. It runs great in reverse. Any help would be greatly appreciated.
  • FORD 600 Rebuild with my SON! - Good afternoon fellow tractor enthusiasts. I have a question. Me and my son are restoring our very first tractor together. We chose a Ford 600 because of its ease of use and readily available parts. However, unbeknownst to me, I did not know initially that the system was a six volt system so I put a 12 volt battery on the tractor and tried to start it. You can turn over and turn over but would never start. I didn't notice that the distributor and condenser had gotten quite hot from cranking the ...
  • 600 hydraulic lift cover linkage - Got the lift cover apart on my 600 and everything appears good except the pin that runs on the lift arm shaft cam. It appears worn 3/4 way thru with a slot the same width as the cam. Since I do not have a parts book, will someone confirm that pin should not have a slot in it. Also, what would be the Ford part number for this pin. Thank
  • Pushing rear axle from Ford 600/601 Workmaster - I am posting a picture of the business end of a fixture I made with scraps from around the shop that I used with a 12 ton press that comes from HF or NT. The 12 ton press had enough power but was very close to its limit for length capacity to hold the axle and fixture. Several things could be done to increase the holding capacity an inch or two but I didn't need it. If you use a close fitting round pipe as I did don't forget to use your oscillating spindle sander to remove the seam inside the pi ...
  • Valve adjustment nut 600 Ford - Ford 600 , 1956 valve adjuster. There are no screwdriver adjustments for the valves. It just has the bolt to adjust It, it looks like. Is there a place I have to loosen up first? I am no mechanic by no means. I don't want to screw up my valves. Just hard to get anyone to look at it around here. Thank you in advance. Hopefully this posts this time.


  • Recent Ads


    600 ford tractor,needs motor fix, the rest is nice, good tin 5 speed, 1750.00 call 320 864 5012. Condition: used, Price: 1750.00, Posted 2023-03-05 by Roger Cohrs, in glencoe MN.

    FORD N series Steel Wheels front and rear. Rears are flat w short lugs not skeleton were on 600 series too. Price 450 calls only Posted 2023-03-14 by James, in IA.

    Important: Yesterday's Tractor Co. takes no responsibility for the accuracy, validity or availability of the items listed here nor do they receive any profit from the 3rd party transactions that may transpire from the use of this website. Yesterday's Tractor Co. does not sell tractors, nor do we collect money or broker transactions for others.


    Archived Ads for Ford 600 Tractors
    (Information only, no longer for sale)


    Power Steering Ford Tractor 600,800,Early 2000,4000 Complete Unit(Minus Hydraulic Pump)Steering Box,CylindersRadius Arms,Crank Pulley,etc Condition: Good, Price: 550, Posted 2020-10-05 in OH.

    Ford 600 Tractor - converted 12-volt system. Been using to brushhog, run post hole digger and blade driveway. Would be a good resoration project. Thermostat sticking and 1st gear slips out of gear at times, needs tires. Otherwise good shape. Been stored in a barn when not used. Condition: good, Price: 2450.00, Posted 2020-10-23 in Atoka OK.

    Ford 600 with belly brush hog Condition: good, Price: 3800, Posted 2020-12-31 in 13440 NY.

    Wanted lift links that go between rockshaft and 3 point arms for a 600 ford tractor. Left hand side is solid. Right hand side has a crank Condition: Good , Posted 2021-01-04 in Milton WV.

    Ford 134c.i. Tractor Engine Good Running Complete less Flywheel Came out of a Ford 600 Can Hear Run Also FIt Jubilee,700,2000,etc. Condition: Good, Price: 675.00, Posted 2021-03-28 in OH.

    Important: Yesterday's Tractor Co. takes no responsibility for the accuracy, validity or availability of the items listed here nor do they receive any profit from the 3rd party transactions that may transpire from the use of this website. Yesterday's Tractor Co. does not sell tractors, nor do we collect money or broker transactions for others.


    Our Most Popular Ford 600 Parts

    (Click here to see all parts available)

    Ford 600 Brakes

    600 Brake Repair Kit
    Brake Repair Kit - This Brake Repair Kit is for all 4-cylinder Ford tractors built from 1955 through 1964, except Major[...] 105515 ... $47.50
    600 Brake Shoe with Lining, Pack of 2 Shoes
    Brake Shoe with Lining, Pack of 2 Shoes - This brake shoe with lining is for tractor models 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000[...] 105488 ... $64.22
    600 Parking Brake Lever
    Parking Brake Lever - For tractor models NAA, Jubilee, 600, 700, 800, 900 all from 1953-1957.[...] 126597 ... $22.64

    Ford 600 Clutch

    600 Clutch Disc
    Clutch Disc - Clutch disc measuring 9 inches with a 1 3/8 inch hub and 10 splines. This is a 6 spring clutch. Fits[...] 111601 ... $36.60
    600 Clutch Kit, 9 Inch, Single Clutch
    Clutch Kit, 9 Inch, Single Clutch - This 9 inch Clutch Kit contains 10 spline spring drive disc part number NAA7550A, 9 inch single pres[...] 121833 ... $123.60
    600 Clutch Release Arm Kit
    Clutch Release Arm Kit - This clutch release arm kit is for tractors 8N, NAA, Jubilee, 600, 700, 800, 900 (up to 1958). Clutc[...] 182518 ... $61.80
    600 Release Bearing Hub
    Release Bearing Hub - This release bearing hub is for tractor models: 1801, 1821, 1841, 2000, 2030, 2031, 2111, 2120, 2130[...] 163512 ... $43.40

    Ford 600 Cooling System

    600 Fan Blade, 3 Blade
    Fan Blade, 3 Blade - This 3 blade fan measures 16 inches in diameter. Fits tractor models: 501, 600 Series, 601 Series, 8[...] 100771 ... $44.40
    600 Fan Shroud
    Fan Shroud - This fan shroud is for tractor models: NAA, Jubilee, 501, 541, 600, 601, 700, 701, 800, 801, 900, 90[...] 109990 ... $80.00
    600 Radiator
    Radiator - This radiator has 3 rows of tubes, stamped steel inlets and outlets. This radiator fits tractor mode[...] 101693 ... $260.00
    600 Thermostat Housing
    Thermostat Housing - This thermostat housing is for tractor models NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, [...] 160754 ... $56.00
    600 Water Pump - uses Bolt-On Pulley
    Water Pump - uses Bolt-On Pulley - This water pump uses the bolt on style pulley, which does not come with the water pump and is not av[...] 100557 ... $52.00
    600 Water Pump - with Press-On Pulley
    Water Pump - with Press-On Pulley - This water pump with press on style pulley replaces OEM CDPN8501C. This water pump comes with the pu[...] 100556 ... $61.00

    Ford 600 Decals and Emblems

    600 Ford Script Painting Mask
    Ford Script Painting Mask - This Ford script painting mask set includes 2 smaller 7-1/4 inch x 1-3/4 inch and 2 large 9 inch x 3[...] 178198 ... $22.69

    Ford 600 Electrical System

    600 12 Volt Conversion Kit
    12 Volt Conversion Kit - For 4 cylinder gas engines on 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000, all pre 1965. Not [...] 103142 ... $163.00
    600 Alternator
    Alternator - This new alternator is 12 volt, 63 amp, Delco 10SI type with self exciting regulator. For 2000, 4000[...] 111377 ... $108.00
    600 Alternator Adjustable Arm
    Alternator Adjustable Arm - Alternator Adjusting Arm. For alternator conversion on the following tractors (1953 to 1964): NAA, J[...] 172574 ... $23.29
    600 Alternator Bracket, Base
    Alternator Bracket, Base - Base alternator bracket. For NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 2000, 4000. All 1953 t[...] 172491 ... $42.29
    600 Alternator Pulley
    Alternator Pulley - For 8N, 9N, 2N, NAA, 600, 700, 800, 900. All using 12 Volt conversion kits with a Delco single wire [...] 172594 ... $19.40
    600 Coil, Ignition 12V
    Coil, Ignition 12V - Ignition Coil. This coil is used with an External Resistor if needed. Replaces OEM part numbers Case[...] 105282 ... $19.30
    600 Coil, Ignition 6V
    Coil, Ignition 6V - Standard 6 Volt Coil. Fits many models.[...] 105281 ... $15.70
    600 Distributor
    Distributor - With 12 tooth Helican Gear for Ford with 4 cylinder gas engine, 1955-1964, with Hex Shaped Shaft. Co[...] 105328 ... $140.00
    Electronic Ignition Conversion Kit, 12V Negative Ground - Pertronix Electronic Ignition kit for the following tractors using 4-cylinder gas engine: 8N (using [...] 105079 ... $153.00
    Electronic Ignition Conversion Kit, 6V Positive Ground - Use on the following tractors with 4-cylinder engines: Ford NAA, Jubilee, (500, 600, 620, 630, 640, [...] 105080 ... $162.00
    600 Generator
    Generator - New LUCAS type Generator 12 volt, 22 amp, 1965 to 1975, less pulley. 2000, 3000, 4000, 5000 Gas and [...] 140527 ... $101.00
    600 Generator Repair Kit
    Generator Repair Kit - For 2 brush generators 8N10001, FAC10002A. On tractors 8N, NAA, Jubilee, 501, 600, 601, 700, 701, 80[...] 182496 ... $24.70
    600 Spark Plug Wire Set, Custom, 4 Cyl.
    Spark Plug Wire Set, Custom, 4 Cyl. - For tractor models before 1965, 4 Cylinder, 90 degree boot, for 134 and 172 Gas Engines. Boots const[...] 155171 ... $18.20
    600 Starter Drive
    Starter Drive - Drive assembly. For tractor models: 2000, 4000, 501, 600, 700, 800, 900, NAA, Jubilee.[...] 110819 ... $32.60
    600 Starter Repair Kit
    Starter Repair Kit - For OEM Starter FAC-1102N on NAA, Jubilee, 600, 700, 800, 900, 2000, 4000, 6000, Major, Super Major,[...] 183911 ... $28.00
    600 Starter Solenoid Assembly
    Starter Solenoid Assembly - This 6 or 12 Volt Starter Relay is for NAA, Jubilee, 600, 700, 800, 900, all 1953-1957. Flat mount, [...] 105677 ... $20.00
    600 Starter Switch
    Starter Switch - With mounting gasket. Fits 8N (1948-1952), all except Select-O-Matic tractors. Also NAA, Jubilee, 50[...] 105685 ... $17.90
    600 Tune-up Kit, Basic
    Tune-up Kit, Basic - This Basic Ignition Tune-up Kit is for 4 cylinder gas tractor models NAA, NAB, Jubilee, 8N with side[...] 183923 ... $23.80
    600 Voltage Regulator, 6 Volt
    Voltage Regulator, 6 Volt - This 6 volt positive ground Regulator has 3 terminals (armature, field, battery). It is designed for[...] 105537 ... $30.00
    600 Wiring Harness, 12 Volt Conversion
    Wiring Harness, 12 Volt Conversion - For tractor models NAA, Jubilee, 600, 700, 800, 900, 2000, 4000, 601, 701, 801, 901. All 1953 to 196[...] 164238 ... $19.80

    Ford 600 Engine Bearings

    600 Main Bearing Set, 134, 144, 172 Engines, STD
    Main Bearing Set, 134, 144, 172 Engines, STD - For 134, 144 and 172 4-cylinder Gas or Diesel engines. (STD Size). 1 kit used per engine. Contains c[...] 106267 ... $44.30
    600 Rod Bearing Set, 134, 144 and 172 Gas or Diesel, STD
    Rod Bearing Set, 134, 144 and 172 Gas or Diesel, STD - With journals measuring 2.298 inches. For 134 and 172 4-cylinder GAS or Diesel and 144 diesel engine[...] 184749 ... $51.50

    Ford 600 Engine Gaskets

    600 Head Gasket, 134CID Gas Engines
    Head Gasket, 134CID Gas Engines - Head Gasket, metal clad with 7/16 inch or 1/2 inch head bolt holes. For: NAA, Jubilee, 600, 601, 700[...] 182485 ... $29.00
    600 Overhaul Gasket Set
    Overhaul Gasket Set - This Full Overhaul Gasket Set comes with rope crankshaft seals, does not come with the 2 C0NN6701A r[...] 106275 ... $80.00
    600 Upper Engine Gasket Set
    Upper Engine Gasket Set - Metal head gasket for 1/2 inch or 7/16 inch bolt holes. For tractors: NAA, 600, 700; 134 CID engine [...] 185151 ... $45.00

    Ford 600 Engine Parts

    600 Ring Gear, Flywheel
    Ring Gear, Flywheel - Fits all models Ford 1939 thru 1964; except Fordson Major and Dexta. This gear has 134 teeth. Inside[...] 110232 ... $28.30

    Ford 600 Engine Rings

    600 Piston Ring Set
    Piston Ring Set - Standard 3-ring set. Complete set for 4 pistons. For 2000, 600, 601, 700, 701, NAA. All with 3 7/16 [...] 185927 ... $43.30

    Ford 600 Exhaust System

    600 Exhaust Elbow With Gasket
    Exhaust Elbow With Gasket - Outlet is 1 5/8 inch outside diameter. For 2000, 501, 600, 601, 700, 800, 801, 900, 901, 1800, 1801,[...] 185223 ... $35.40
    600 Exhaust Pipe, Curved
    Exhaust Pipe, Curved - Outlet pipe, horizontal, curved section. Outlet 1-1/2 inch outside diameter. For 134 CID gas engines[...] 114744 ... $23.80
    600 Exhaust Pipe, Horizontal
    Exhaust Pipe, Horizontal - Outlet pipe extension, rear straight section. For: NAA, 2000 (1963-1964), 501, 600, 601, (1958-1962 [...] 115438 ... $32.40
    Manifold, Gas - Intake and Exhaust Manifold. For 4 Cylinder Gas Engines in NAA, Jubilee, 600, 601, 700, 800, 801, 90[...] 101516 ... $102.00
    600 Muffler and Pipe Assembly, Vertical
    Muffler and Pipe Assembly, Vertical - For the following 134 CID gas tractors: NAA, Jubilee, 501, 600, 700, 4-cylinder 2000 series, ALL 195[...] 100580 ... $72.00
    600 Muffler, Horizontal
    Muffler, Horizontal - For tractor models NAA, Jubilee, 501, 600, 601, 700, 4-cylinder 2000 (1953-1964), 800, 900, (1955-19[...] 100570 ... $25.30
    600 Vertical Exhaust Pipe
    Vertical Exhaust Pipe - This Vertical Exhaust Pipe comes with support bracket. It does not come with a muffler. Pipe inlet 1[...] 111035 ... $51.00

    Ford 600 Fuel System / Air Intake

    600 Air Cleaner Hose
    Air Cleaner Hose - Rubber air cleaner to carburetor hose is not like original metal tube. VERIFY THE INSIDE DIAMETER AT[...] 173789 ... $38.60
    600 Air Cleaner Tube
    Air Cleaner Tube - Has 1 5/8 inch outside diameter. For tractor models NAA, Jubilee, 601, 541, 600, 601, 611, 620, 621,[...] 126390 ... $32.50
    Carburetor - This carburetor features reversible linkage. NOT FOR USE WITH BALL END TYPE LINKAGE. This Zenith car[...] 100748 ... $462.50
    600 Carburetor
    Carburetor - For tractor models: 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840. Replaces TSX580, Zen[...] 155438 ... $144.20
    Carburetor - With reversible linkage. This Zenith carburetor outperforms the original carbs used on: 600, 620, 63[...] 100758 ... $478.80
    600 Carburetor Kit, Basic
    Carburetor Kit, Basic - Kit includes needle and seat, float lever pin, seal, gaskets and instructions. Repairs 61, 68 and 16[...] 183586 ... $27.70
    600 Carburetor Kit, Basic
    Carburetor Kit, Basic - Basic Carburetor kit with Viton Needle and Seat. For tractor models 2000, 501, 600, 601, 700, 701, N[...] 118644 ... $22.00
    600 Carburetor Kit, Basic
    Carburetor Kit, Basic - Kit for Marvel TSX692, TSX765, TSX976, TSX580, TSX500, TSX577, TSX241A, TSX241B, TSX241C, TSX420, TS[...] 100733 ... $21.20
    600 Carburetor Kit, Complete
    Carburetor Kit, Complete - For tractor models NAA, Jubilee 1953-64 with 134 CID gas engine, 600 and 700 1955-1957 with 134 CID [...] 112352 ... $46.40
    600 Cyclone Air Cleaner Glass Jar
    Cyclone Air Cleaner Glass Jar - For 8N, 9N, 2N, NAA, Jubilee, 600, 700, 800, 900, 601, 701, 801, 901, 2000, 4000, all 1939 to 1964. [...] 178043 ... $23.43
    600 Cyclone Cup and Spring Assembly
    Cyclone Cup and Spring Assembly - Only for those tractors (1939 to 1964) that used the CYCLONE Air Cleaner Assembly which MAY include:[...] 178172 ... $19.96
    600 Fuel Filter
    Fuel Filter - Fuel Sediment Filter. For all 144 and 172 CID Diesel tractors 2000, 4000, 501, 600, 601, 700, 701, 8[...] 159728 ... $23.02
    600 Fuel Line
    Fuel Line - Line is 1/4 inch. For tractor models 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661[...] 155448 ... $26.70
    600 Fuel Shut Off Valve
    Fuel Shut Off Valve - Valve has 3/8 inch female outlet. For gas powered tractor series: 500, 600, 620, 630, 640, 650, 660,[...] 107024 ... $27.70
    600 Fuel Tank
    Fuel Tank - For Gasoline engines 11 gallon, no opening for sending unit. Tank has two threaded openings in botto[...] 103892 ... $216.00
    600 Throttle Control Rod
    Throttle Control Rod - 4-1/2 inch overall length, includes one Spring Steel Clip at each end of the rod. For tractor models[...] 179893 ... $24.38
    600 Throttle Control Rod
    Throttle Control Rod - Governor to Carburetor, Clevis End is not included. For tractor models: 2000 4 Cylinder, 4000 4 Cyli[...] 153500 ... $19.76

    Ford 600 Gauges

    600 Instrument and Gauge Kit 4 Speed
    Instrument and Gauge Kit 4 Speed - For NAA, Jubilee, 600, 700 with 4 speed transmission, 800, 900. ALL 1953 to 1957. Instrument and gau[...] 120573 ... $133.90
    600 Instrument Panel Light
    Instrument Panel Light - 12 Volt for tractor models NAA, Jubilee, 501, 600, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660,[...] 125669 ... $20.00
    Oil Pressure Gauge - For tractor models: 8N, 9N, 2N, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 200[...] 113472 ... $16.10
    Oil Pressure Gauge, 80 pound - For the following tractors (before 1965): 600, 601, 700, 701, 800, 801, 2000, 4000, NAA. Oil pressur[...] 110411 ... $15.40
    600 Tachometer Cable, Steel
    Tachometer Cable, Steel - Ford Steel Jacketed Proof Meter/Tach cable 30 1/2 inches long. Fits the following tractors (before 1[...] 102193 ... $15.50
    600 Tachometer (Proofmeter)
    Tachometer (Proofmeter) - This proofmeter is used on Ford tractors 1953-1964 with 4-Cylinder Engines and 4-Speed Transmissions[...] 100613 ... $34.90
    600 Tachometer (Proofmeter)
    Tachometer (Proofmeter) - For tractor series: 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000. All with 4-Cylinder Engine a[...] 100614 ... $35.00
    600 Temperature Gauge, Black Rim
    Temperature Gauge, Black Rim - For NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000. All 4-Cylinder before 1964 (ex[...] 103887 ... $25.40
    600 Temperature Gauge, Chrome Rim
    Temperature Gauge, Chrome Rim - For tractor models: NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000. All 4-Cylinder[...] 178051 ... $38.35

    Ford 600 Hitch / Drawbar

    600 Drawbar Link Check Chain Anchor
    Drawbar Link Check Chain Anchor - Anchor, Drawbar Link Check Chain (pair- one right and one left). For Dexta, NAA, Super Dexta, Jubile[...] 186635 ... $19.87
    600 Leveling Box Assembly, Right Hand
    Leveling Box Assembly, Right Hand - Right Hand Leveling Box Assembly with Fork. Adjusts 23 inches to 27 inches center hole to center hol[...] 179006 ... $101.00
    600 Lower Lift Arm, LH
    Lower Lift Arm, LH - Left hand Category I lift arm has 32.5 inch hole centers. For 600, 620, 630, 640, 650, 660, 800, 820[...] 111312 ... $59.55
    600 Lower Lift Arm, RH
    Lower Lift Arm, RH - This category I lift arm is Right hand. 31.625 inch hole centers. For 600, 620, 630, 640, 650, 660, [...] 111313 ... $57.00
    600 Stabilizer Arm
    Stabilizer Arm - Stabilizer arm measures length 31-1/2 inches center to center. For tractor models 2N, 600, 800, 8N, [...] 110516 ... $15.40
    600 Stabilizer Kit, Extra Heavy Duty
    Stabilizer Kit, Extra Heavy Duty - Universal Stabilizer Kit For 8N, 9N, 2N, NAA, Jubilee, 600, 800. Contains (2) stabilizer bars, unive[...] 152387 ... $74.00
    600 Swinging Drawbar
    Swinging Drawbar - For 600, 840, 841, 851, 860, 8N, NAA, Jubilee. Drawbar is 29.375 inches in length, 2 inches wide, 1 [...] 109566 ... $52.00
    600 Swinging Drawbar Clevis Assembly
    Swinging Drawbar Clevis Assembly - Clevis Assembly with Pins for SDA6 or SDA8 kits. For tractor models 8N, NAA, NAB, 600, 601, 800, 801[...] 178030 ... $54.80
    600 Swinging Drawbar Kit
    Swinging Drawbar Kit - This Drawbar assembly is for NAA, 600, 8N. Swinging drawbar kit. Contains Drawbar: 29.375 inches lon[...] 111411 ... $119.00
    600 Top Link Rocker
    Top Link Rocker - For 8N, 9N, 2N, NAA, Jubilee, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, [...] 126752 ... $59.00

    Ford 600 Hydraulic System

    600 Coupler Hub, Hydraulic Pump
    Coupler Hub, Hydraulic Pump - For use with Loader-Backhoe Hydraulic Pumps. Hub is 4 inches overall diameter, 4 mounting holes at 7[...] 112100 ... $43.20
    600 Draft Control Plunger
    Draft Control Plunger - For tractor models 8N, 9N, 2N, NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000, Dex[...] 111890 ... $38.50
    600 Hydraulic Adapter Kit
    Hydraulic Adapter Kit - Hydraulic adapter plate kit. Contains 1-HV4901 adapter plate, mounting cap screws, O-rings and mount[...] 111565 ... $81.00
    600 Hydraulic Lift Control Quadrant
    Hydraulic Lift Control Quadrant - For tractor models 8N, 9N, 2N. Hydraulic Lift Control Lever connects to this. Also fits NAA, Jubilee[...] 111910 ... $26.80
    600 Hydraulic Lift Shaft Arm
    Hydraulic Lift Shaft Arm - For 8N, 9N, 2N, NAA, Jubilee, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900, [...] 114032 ... $53.00
    Hydraulic Pump Drive Shaft - Shaft is 3/4 inch diameter, 9-3/8 inches overall length. End A type: key, 3/4 inch size. End B type:[...] 111747 ... $36.00
    600 Hydraulic Pump Gasket Kit
    Hydraulic Pump Gasket Kit - Piston Type Hydraulic Pump Gasket and O-Ring Kit. For 2000, 4000, 501, 600, 601, 700, 701, 800, 801,[...] 182513 ... $29.90
    600 Hydraulic Pump Repair Kit
    Hydraulic Pump Repair Kit - Hydraulic Pump Repair Kit is for the Piston Type Pump. Services 1953-1964 four cylinder gas and dies[...] 111682 ... $45.60
    600 Hydraulic Pump Shaft
    Hydraulic Pump Shaft - Wobble Shaft For 4 Cylinder Models (1953-1964) Using NAA600D Or NCA600F Pump Assemblies. For tractor[...] 111681 ... $72.00
    600 Lift Cylinder Safety Valve
    Lift Cylinder Safety Valve - For tractor models: 2000 (4 cylinder 2120, 2150, 2300, 230A, 231, 2310, 233, 234, 2600, 2610, 2810, [...] 169627 ... $19.80
    600 Plate Hydraulic lift Control
    Plate Hydraulic lift Control - Friction plate for hydraulic lift lever control. Use with disc C5NN518B. For 2000, 2N, 4000, 501, 60[...] 111910 ... $26.80

    Ford 600 Lights

    600 Headlight Rim
    Headlight Rim - Headlight Rim, grey finish. Ring with bolt for 310066 (6 Volt) and 310068 (12 Volt) 5 7/8 inch diame[...] 179208 ... $18.44

    Ford 600 Oil System

    600 Oil Filter
    Oil Filter - Cartridge Type. For tractor models NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 6[...] 119300 ... $19.10
    600 Oil Filter Adapter Kit, Spin On
    Oil Filter Adapter Kit, Spin On - Converts tractor from element style filter to spin on oil filter. Comes with one filter. For tractor[...] 115244 ... $41.20
    600 Oil Pan Plug Kit
    Oil Pan Plug Kit - Gasket, Oil Pan Plug and Screen Assembly. For all gas models 1939-1964. Fits 8N, 9N, 2N, NAA, Jubile[...] 108080 ... $25.90

    Ford 600 Paint

    Paint, Medium Gray, 1 Gallon - This Ford Medium Grey was used from 1948 through 1965 on models 8N, NAA, Jubilee, 600, 700, 800, 900[...] 100719 ... $57.70
    Paint, Vermillion Red, 1 Gallon - For tractor models (1948-1957). From Tallmans, formulated by Van Sickle, providing OEM quality. High[...] 108327 ... $57.00
    Paint, Vermillion Red, 1 Quart - For tractor models (1948-1957). From Tallmans, formulated by Van Sickle, providing OEM quality. High[...] 108326 ... $25.00

    Ford 600 PTO / Driveline

    600 PTO Shaft, Conversion Assembly
    PTO Shaft, Conversion Assembly - PTO Conversion Assembly. Converts to 1-3/8 inch shaft. Ford tractors: 600, 700, 800, 900. DOES NOT F[...] 111553 ... $107.00

    Ford 600 Seats

    600 Pan Seat
    Pan Seat - This 19 inch wide Fixed Seat For 8N, 9N, 2N, NAA, Jubilee, 600, 620, 630, 640, 650, 660, 800, 2000, [...] 101352 ... $54.00
    600 Pan Seat
    Pan Seat - 19 inch wide Flip-Over Style. Replaces OEM number C5NN400AE. Seat only - does not include spring or [...] 101239 ... $59.00
    600 Seat Cushion (Red)
    Seat Cushion (Red) - For all Ford Tractors with 19 inch wide Steel Pan Seat. This seat cushion is red with a FORD script [...] 178636 ... $65.00
    Seat Cushion (Red and White) - Seat Cushion. Deluxe with 2 inches of foam padding. For all Ford Tractors with 19 inch wide Steel Pa[...] 180739 ... $41.20

    Ford 600 Sheet Metal / Body Parts

    600 Battery Box
    Battery Box - For NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, 1801, 2000, 4000 1953 to 1964. Replac[...] 104045 ... $53.00
    600 Bumper - Heavy Duty
    Bumper - Heavy Duty - For 8N, 9N, 2N, NAA, Jubilee, 600, 800, 2000, (4000SU with I-Beam Front Bumper). Additional $15 ship[...] 104060 ... $187.00
    600 Fender
    Fender - This Fender comes as pictured with mounting bracket and is 25 1/2 inches tall. Fits left hand or rig[...] 104070 ... $135.00
    600 Hood Latch Spring
    Hood Latch Spring - For tractor models Jubilee, NAA, 501, 600, 601, 700, 701, 800, 801, 900, 901, (2000, 4000 with 4 cyl[...] 178099 ... $19.20

    Ford 600 Steering

    600 King Pin Repair Kit
    King Pin Repair Kit - This kit will repair both spindles. Kit contains 2 of each of the following 2N3109 spindle bushing, [...] 104570 ... $34.50
    600 Pin Front Axle
    Pin Front Axle - Pin, front axle unthreaded. Outside diameter 1.743 inches, inside diameter 1.310 inches, length 4 in[...] 112069 ... $35.91
    600 Power Steering Hose
    Power Steering Hose - Single Wire, Braid Hose Assembly with fittings, overall length 30 inches, 90 degree ends, 7/16 x 24 [...] 178183 ... $34.50
    600 Radius Rod, Ball Socket
    Radius Rod, Ball Socket - For tractor models: Jubilee, NAA, 2000 3 cylinder, 2000 4 cylinder, 600, 601, 800, 801, 1811, 1821, [...] 115083 ... $18.10
    600 Spindle Bushing Kit
    Spindle Bushing Kit - Spindle Bushing Kit contains: 2 upper bushings part number 2N3109 and 2 lower bushings part number N[...] 182515 ... $28.00
    600 Steering Sector Kit
    Steering Sector Kit - This Steering Sector Kit is for 1 side, 2 kits used per tractor. Kit contains adjuster bolt, nut, wa[...] 178090 ... $24.00
    600 Steering Shaft Bearing
    Steering Shaft Bearing - For tractor models up to 1964 including: 8N, NAA, Jubilee, 600, 601, 800, 801, 2000, 4000.[...] 111857 ... $19.80
    600 Steering Shaft Bearing and Cup Assembly
    Steering Shaft Bearing and Cup Assembly - 1-3/4 inch outside diameter. For tractor models 8N, NAA, Jubilee, 600, 800, 601, 801, 2000, 4000. Pr[...] 111857 ... $19.80
    600 Steering Shaft Bearing And Cup Assembly
    Steering Shaft Bearing And Cup Assembly - Replacement for bearing type. For tractor models 1948-1964, 8N, NAA, 600, 800. For steering shaft on[...] 178073 ... $21.26
    600 Steering Shaft Repair Kit
    Steering Shaft Repair Kit - Repair kit for Steering Shaft. Services shafts where upper oil seal has worn a groove into shaft cau[...] 173253 ... $58.00
    Steering Wheel - This 3 spoke (covered spoke) steering wheel measures 18 inches in diameter on an 11/16 (tapered) 36 [...] 101425 ... $37.30
    600 Steering Wheel
    Steering Wheel - Steering Wheel OEM Style, 17-1/2 inch diameter, 11/16 inch 36-SPLINE Hub. Metal Spokes. For: 8N, 200[...] 101421 ... $32.90

    Ford 600 Wheels

    600 Front Wheel Bearing Kit
    Front Wheel Bearing Kit - Kit Contains one each: LM67048 inner cone 1.250 in id, LM67010 outer cup 2.328 in od, LM11949 outer [...] 100653 ... $17.70
    Front Wheel Rim - 4.50 inch x 16 inch, 6 bolt hub, 6.0 inch bolt circle, 4.625 inch pilot hole, fits 5.50 inch or 6.00[...] 103756 ... $72.00
    600 Rear Rim
    Rear Rim - This rear rim is six loop, 10 inch x 28 inch. Loops are designed for 5/8 inch bolts. For 8N, 9N, 2N,[...] 103719 ... $142.00
    600 Rear Rim
    Rear Rim - This Six loop rim is 11 inch x 28 inch. Loops are designed for 5/8 inch bolts. For 8N, 9N, 2N, NAA, [...] 104209 ... $172.00

    Click here to see our full catalog of Ford 600 Parts





    TRACTOR PARTS TRACTOR MANUALS
    We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

    Home  |  Forums


    Today's Featured Article - It Can't Be Done! - A Tractor Story - by Neil Campbell. I'll never forget the time back when I was a boy baling hay on our Farm in Big Rapid, Michigan. The most memorable event that took place was a trip up the steepest incline on the farm pulling an old New-Idea baler with a pony-motor for power and a haywagon. I had just talked my Dad into buying an old John Deere B with 6-speeds ahead and I was real proud of it, except it was a little smaller than the Case tractor that we normally ... [Read Article]

    Latest Ad: Looking for an exhaust manifold for a JD 5020 part number R40086 [More Ads]

    Copyright © 1997-2023 Yesterday's Tractor Co.

    All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

    TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

    Yesterday's Tractors - Antique Tractor Headquarters

    Website Accessibility Policy