FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

Case 584D Parts

Category: Steering

[Categories] [All 584D Parts] [All Case Models]

Alloy Steel Ball - Chrome, 1", Grade 24 - For Case Construction and industrial models 430CK, 480B, 480C, 480CK, 480D, 480LL, 500, 530CK, 580, 580B, 580C, 580D, 580SD, 584C, 584D, 584E, 585C, 585D, 585E, 586C, 586D, 586E, Replaces Case OEM number 211-21, (Item #: 168884) $6.10

Axle End, Right Hand - For Case Construction and industrial models 480D, 480E, 480ELL, 480LL, 580C, 580D, 580K, 580SD, 580SE, 580SK, 584D, 584E, 585D, 585E, 586D, 586E, 590 (Turbo), Replaces Case OEM number D69359, Right Side Axle End, For Axle End, Left Hand use Item #: 104357, (Item #: 104358) $480.00

Hub Inner Seal - The measurements on this seal are 1.575 inches inside diameter, 2.169 inches outside diameter, and 0.315 inches thick. It is used in the hub of Carraro 4WD front axles. This part replaces 6190246M1, 118675, 1967605C1, CAR118675, 82848086, 3946626, 83946626, 83937304, 85807964, 83930043, 96839, 47110069, N8897, K260142, K205152, K965236, 1-33-741-636, 3541488M1, 3426192M1, 3019957X1 (Item #: 104714, Ref: CAR118675) $9.60

Lock Pin - For Case Construction and industrial models 480D, 480E (s/n 17003108-later), 480LL (s/n 17003180-earlier), 580C, 580D, 580K, 580SD, 580SE, 580SK, 584D, 584E, 585D, 585E, 586D, 586E, 590 (Turbo), Replaces Case OEM number D57486, Length: 4", Thread 1/2-20 NF, (Item #: 160534) $12.30

O-Ring - For Case Construction and industrial models 480D, 480E (s/n 17003108-later), 480LL (s/n 17003108-earlier), 580C, 580D, 580K, 580SD, 580SE, 580SK, 584D, 584E, 585D, 585E, 586D, 586E, 590 (Turbo), Replaces Case OEM number 238-5139, (Item #: 160536) $2.00

Power Steering Cylinder - This Power Steering Cylinder is used on 2WD models: 480B (SN: 8741258 and up), 480C, 480D, 480E, 480ELL, 480F, 480FLL, 480LL, 580B (SN: 8735171 and up), 580C, 580D, 580F, 580SD, 580SE, 584C, 584D, 584E, 585C, 585D, 585E, 586C, 586D, 586E. It measures 16-1/4 inches center-to-center closed, 23 Inches center-to-center open. This is a double piston cylinder replaces single piston cylinder. 2 used per tractor, sold individually. Note: this will fit earlier B series, but power steering hoses will need to be adapted. Replaces: 234447A1, A137503, A51731, D128454, D84800 (Item #: 126877, Ref: A137503) $105.00

Power Steering Pump - Fits 580D, TLB, Forklift:580C, 584D, 585C, 586C, 584C, 585C, 480C, 480D, 580D, TLB (Item #: 111805, Ref: D84179) $171.00

Power Steering Pump - Case, D120526, D126580 - For Case Construction and industrial models 580D, 580SD, 580SE, 584D, 585D, 586D (All 4WD and 2WD S/N 987900 and Later), Replaces Case OEM number D126580, D93204, D120526, Additional Handling and Oversize Fees Apply To This Item, (Item #: 156773) $850.00

Ring Gear and Pinion Set - For Case Construction and industrial models 480D, 480E, 480F, 580E, 580K (s/n 20, 000-earlier, 2 or 4 W/D), 580SE, 580SE (Transmission s/n 16270319), 584, 584D, 584E, 585, 585D, 585E, 586D, 586E, Replaces Case OEM number A168883, (Item #: 126884) $222.98

Spacer - For Case Construction and industrial models 480D, 480E (s/n 17003108-later), 480LL (s/n 17003108-earlier), 580C, 580D, 580K, 580SD, 580SE, 580SK, 584D, 584E, 585D, 585E, 586D, 586E, 590 (Turbo), Replaces Case OEM number D72371, (Item #: 160537) $0.98

Spindle - Right Hand - For Case Construction and industrial models 480E (s/n 17003108-later), 584, 584D, 584E, 585, 585D, 585E, 586, 586D, 586E, Replaces Case OEM number D125862, Dimension A: 2.164", Dimension B: 1.780", Right Side, (Item #: 104353) $591.00

Spindle with Steering Stop - Left Hand - For Case Construction and industrial models 480D, 480LL (s/n 17003108-earlier), 580C, 580D, 584D, 585D, 586D, Replaces International OEM number D86344, Dimension A: 2.164", Dimension B: 1.780", Left Side, (Item #: 104352) $429.00

Spindle with Steering Stop - Right Hand - For Case Construction and industrial models 480D, 480LL (s/n 17003108-earlier), 580C, 580D, 584D, 585D, 586D, Replaces International OEM number D86343, Dimension A: 2.164", Dimension B: 1.780", Right Side, (Item #: 104351) $561.00

Steering Motor - Case, D90752 - For Case Construction and industrial models 584C, 584D, 585C, 585D, 586C, 586D, Replaces Case OEM number D90752, (Item #: 160086) $984.00

Steering Wheel - 15-1/4 inch diameter, 36 spline, 13/16 inch shaft, 3 covered spokes. For tractor models 480, 480B, 480C, 480D, 480LL, 580, 580B, 580C, 580D, 584C, 584D, 585C, 586C, 586D, 680B, 780, 770, 870, 970, 1090, 1170, 1175, 1270, 1370, 1570, 1896, 2090, 2094, 2290, 2294, 2096, 2390, 2394, 2470, 2590, 2594, 2670, 2870, 3294, 3394, 3594, 4690. Replaces A65544. (Item #: 122471, Ref: A61007) $72.00

Thrust Washer - For Case Construction and industrial models 480C, 480D, 480E, 480ELL, 480F, 480FLL, 480LL, 570LXT, 580C, 580D, 580K, 580L, 580SD, 580SE, 580SK, 580 Super L, 584D, 584E, 585D, 585E, 586D, 586E, 590 Super L, Replaces Case OEM number D72372, 2.012" I.D., 2.730" O.D., (Item #: 160535) $7.98

Tie Rod End - Many two wheel drive Case industrial models use this tie rod end. It measures 3.750 inches from center of the ball joint to the end of the shaft. The shaft is 0.875 inches with 18 NF Left Hand Thread. Used on Case models 480C, 480D, 480E, 480F, 480LL, 580C, 580D, 580E, 580G, 580SD, 580SE, 584D, 584E, 585D, 585E, 586D, 586E, 586FL. (Item #: 104469, Ref: D88492) $23.50

Tie Rod End - Many two wheel drive Case industrial models use this tie rod end. It measures 3.750 inches from center of the ball joint to the end of the shaft. The shaft is 0.875 inches with 18 NF Right Hand Thread. Used on Case models 480C, 480D, 480E, 480F, 480LL, 580C, 580D, 580E, 580G, 580SD, 580SE, 584D, 584E, 585D, 585E, 586D, 586E, 586FL. (Item #: 104468, Ref: D88491) $20.70

Tie Rod End - Used on Case / David Brown models with 4WD: 1390, 1394, 1494, 1594, 1690, 1690 Turbo, 1694 480B, 480C, 480D, 480E, 580, 580 Super D, 580B, 580C, 580D, 580E, 580F, 580G, 580SE, 584D, 584E, 584FL, 585D, 585E, 586D, 586E, 586FL. This tie rod end measures 105mm from the center of the ball joint to the end of the threads. The rod has M24 x 1.5 Left Hand threads. Replaces K956936, K262981, K88482, K262887, K260250 (Item #: 104473, Ref: K88482) $33.00

Universal Parts and Accessories
Category: Steering

Eaton Power Steering Pump Replacement - This Power Steering Pump replaces the Eaton style belt driven Power Steering Pump. It also replaces Eaton part numbers: 503-1005-005, 20928 and P761. This is a Redesigned Pump that uses a bearing instead of original bushing. It can also be adapted to tractors using Char-Lynn Power Steering with an Eaton Pump. Please note that this pump does not include brackets, top mounted reservoir, or pulley. Some applications will require a new pressure hose to be made for a 5/8-18 inch inverted flare type fitting. The shaft diameter measures .670 inches. The shaft length, where the pulley mounts measures .575 inches. There is a 2 inch thick pump housing where the bracket bolts on. Pressure is preset at 1.32 GPM. (Item #: 113730, Ref: S03-1003) $417.87

Filter, Power Steering - Filter case size is 3 inches diameter and 1 1/2 inch height. Center hole is approximately 7/8 inch diameter. VERIFY size before ordering. It is used on tractors with Eaton style power steering pumps. Replaces: A22279, A30834, A42242, G45307, K964615, O10582AB, K902187, K960750 (Item #: 111126, Ref: AE33538A) $12.60

Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Item #: 164438, Ref: ABC1417) $48.40

Steering Wheel Spinner, Bare Aluminum - Comes with mounting hardware. (Item #: 108667, Ref: R3275) $8.00

Steering Wheel Spinner, Blue - Comes with mounting hardware. (Item #: 108664, Ref: R3279) $8.60

Steering Wheel Spinner, Green - Comes with mounting hardware. (Item #: 108666, Ref: R3278) $13.40

Steering Wheel Spinner, Orange - Comes with mounting hardware. (Item #: 108660, Ref: R6323) $42.50

Steering Wheel Spinner, Red - Comes with mounting hardware. (Item #: 108663, Ref: R3277) $8.90

Steering Wheel Spinner, Yellow - Comes with mounting hardware. (Item #: 108665, Ref: R3280) $8.00

No
Picture
Wheel Spinner- Black - Wheel Spinner, black knob, universal. WSV124B (Item #: 108662, Ref: R3276) $9.60

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Steering

[Categories] [All 584D Parts] [All Case Models]

Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT

Order online
anytime!

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy