FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

Massey Ferguson 35 Parts

Category: Steering

[Categories] [All MF35 Parts] [All Massey Ferguson Models]

Axle Bushing, Flanged - Front pivot support bushing with swept back axle. 2.075 inch outside diameter, 1.750 inch, .820 inches long. For tractor models TE20, TO20, TO30, TO35, MF35, MF135, MF235, 20, 2135. Length of bearing may vary but will fit application if over .790 inches. (Item #: 114715, Ref: 182850M1) $4.98

Axle Pin Bushing - Long variation of 182850M1. For the same application but length is 1.482 inches. For: TE20, TO20, TO30, TO35, MF35, MF135, MF235 industrial: 20, 2135. 2.075 inch outside diameter, 1.750 inch, 1.482 inches long. (Item #: 184791, Ref: 182850M1-L) $7.60

Axle Support, Front - Pin 1-3/4 inch x 9-3/4 inch. For models 2135 Industrial, TO35 with gas engine, 135 with serial number before 9A86903, 135 UK with serial number before 140129, 20 with serial number before 9A86902, 35 and FE35X. (Item #: 165186, Ref: 888347M2) $456.00

Axle, Swept Front with Bushing - For Massey Ferguson: Industrial 20, 2135, FE35, TE20, TEA20, TEF20, TO20, TO30 TO35, 135, 230, 235, 35. Swept Front Axle with Bushing. (Item #: 173497, Ref: 183219M91) $160.00

Drag Link Dust Cover - Rear Tie Rod Boot with leather insert. Fits tractor models TEA20, TO20, TO30, TO35, MF35. Replaces: TO3324. (Item #: 178150, Ref: 9N3324OE) $16.80

Front Axle Pin - Solid Center - For Massey Ferguson tractor models TE20, TEA20, TO20, TO30, TO35, 20, 35, 35X, 135, 135 (s/n 9A86902-earlier), 148 (s/n 604669-earlier), 2135, Replaces Massey Ferguson OEM number 183221M1, 193746M1, Diameter: 1.75", Length: 5.50", (Item #: 155652) $31.70

Gasket, Steering Box Mounting - For tractor models F40, FE35, TO35, 1080, 1085, 135, 150, 165, 165 UK, 175, 175 UK, 178, 180, 20, 20C, 2135, 230, 231, 235, 245, 255, 261, 265, 282, 285, 30, 30B, 31, 40B, 50A, 50C, 50D, 35, 35 UK, 40, 50, MH50. Replaces 520307M1, 5230307M1, 180511M1, 180511M2, 180511M92 (Item #: 168134, Ref: 180511M2) $4.80

O-Ring, Steering Sector - For Massey Ferguson tractor models 35, 135, 205, 2135, Compatible with Massey Ferguson Construction and industrial models 20, 202, 203, 204, Replaces Massey Ferguson OEM number 180561M1, (Item #: 113782) $2.90

Pivot Pin - Pivot Pin for swept back axles. VERIFY MEASUREMENTS. 1-3/4 inch outside diameter, 5 1/2 inches long, 1 inch bolt hole (which adequately replaces a 7/8) and 1 inch diameter crank hole. Will fit shorter applications. Fits TO20, TO30, TO35, 35, 135 prior to serial number 9A86902; Industrials: 20 prior to serial number 9A86902; 2135 Turf and narrow. Use bolt part number 181953M1 Replaces 193746M1. (Item #: 128512, Ref: 183221M1) $34.60

Pivot Pin Retaining Bolt - This Pivot Pin Retaining Bolt is used with 193746M1 Axle Pivot Pin. It has a 15/16 inch shoulder diameter. Thread size�5/8 inch X 1 7/8 inch NF. Replaces 181953M1, 181953M2. (Item #: 154781, Ref: 181953M2) $6.10

Planetary Selector, Used - For Massey Ferguson tractor models F40, TO35, 35, 35X, 50, 135, 150, 165, 175, 180, 230, 231, 235, 240, 240P, 241S, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 360, 362, 375, 383, 390, 390T, 393, 398, 431, 451, 471, 481, 491, 492, 543, 583, 596, 1080, 1085, 2625, 2650, 2660, 2670, 2680, 4225, 4233, 4235, 4240, 4243, 4245, 4253, 4255, 4263, 4265, 4345, 4355, Compatible with Massey Ferguson Construction and industrial models 11, 20, 20C, 20D, 20F, 30, 30B, 30D, 30E, 31, 40, 40B, 40E, 50A, 50C, 50D, 50E, 50H, 60, 202, 203, 204, 205, 302, 304, 356, 2135, 2200, 3165, Replaces Massey Ferguson OEM number 180446M1, For a new version of this item use Item #: 173169, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 460974) $8.01

Power Steering Cylinder Adapter - This Power Steering Cylinder Adapter is used on 35, 135, 20, 2135 Tractors. It replaces original part number 1019500M91. (Item #: 179586, Ref: 1019500M91) $110.00

Power Steering Cylinder Kit - Includes: cylinder housing, piston, plate, adapter, rack, pin power steering rack, nut 1/2-20 toplock, snap ring and rod. For the following tractors: 135, 20, 2135, 35, 35 Turf, 35 Utility, TO35. Requires, but does not include a seal kit OEM number 835682M91. We do not have the seal kit available. VERIFY PART NUMBER TO ENSURE CORRECT REPLACEMENT. (Item #: 165267, Ref: 1041940M91) $521.34

Power Steering Cylinder Left - Comes with 2 ball joint ends. 12.5 inches long, 5/8 inch diameter rod. 5.640 inch stroke. For 135 Orchard, 240, 250 and Industrials 20, 35 Utility, 202, 203, 204, 205, 2135. Replaces 1662946M92, 1674491M92, 1673086M91, 3401240M91, 3401 240M91, 001403U91, 1885715M91. VERIFY PART NUMBER TO ENSURE CORRECT REPLACEMENT. Uses 3314663M91 repair kit. (Item #: 118573, Ref: 3401240M91) $121.00

Power Steering Cylinder Rack - For 35, TO35, 135, 2135, 20. Power Steering Cylinder Rack, new style. To add to order enter in comment section. must be used with "new style" shaft Rack and Pin Set Available as part number 1751665M1KIT (Item #: 155114, Ref: 1751665M1) $163.00

Power Steering Cylinder Right - Comes with 2 ball joint ends. 12.5 inches long, 5/8 inch diameter rod. 5.640 inch stroke. For 135 Orchard, 240, 250 and Industrials 20, 35 Utility, 202, 203, 204, 205, 2135. Replaces 0011404U91, 001404U91, 1662947M92, 1673087M91, 1674492M92, 3401241M91. VERIFY PART NUMBER TO ENSURE CORRECT REPLACEMENT. Uses 3314663M91. (Item #: 118574, Ref: 3401241M91) $140.00

Power Steering Filter - This Power Steering Filter is closed on one end with a spring, and open on the other end. It measures 2 Inches Outside Diameter, 1/2 Inch Inside Diameter, and 1-1/2 Height. If the canister o-ring is needed, order 1055980M1 separately. Replaces 1852097M1, 1052097V1, 1052097M1 (Item #: 183589, Ref: 1852097M1) $10.60

Power Steering Gear Rack Wear Block Assembly - Assembly contains Plate, Ware Block and 2 Screws. For tractor models 35, TO35, 135, 2135. Power Steering Gear Rack Wear Block Assembly. Also replaces 1751653M1, 751644M1, 1751643M1, 1751644M1. (Item #: 178301, Ref: 1751653M1) $43.40

Power Steering Pin - This Power Steering Pin is used on 35, 135, 20, 2135 Tractors. It replaces original part number 1041936M1 (Item #: 173334, Ref: 1041936M1) $13.62

Power Steering Piston Rod Seal - This power steering piston rod seal has a .625 inch Inside Diameter, a 1.128 inch Outside Diameter and is .25 inch wide. It Fits: 135, 2135, 35, FE35, MF20 Industrial, TO35. Replaces: 1751701M1 (Item #: 178140, Ref: A26778) $7.80

Power Steering Plate - Mounts under steering wheel nut, 2-1/2 inch outside diameter, 5/8 inch center hole with keyway, anodized red aluminum. For tractor models 35, 65, 85, 88, Super 90, Industrials 202, 203, 204, 205, 303, 404. (Item #: 126606, Ref: 183174M1) $20.20

Power Steering Pump - Straight cut gear, 13 teeth, includes drive gear, reservoir and adjustable relief valve preset at 1500 PSI. BARNES style pump, hose fittings on gear side of pump. Does not come with mounting gasket. We do not have a gasket available. For tractors using Perkins 3 Cylinder Gas or Diesel Engines. Models: 35, 50, 135, 150, M230, MF235, MF245, MF250, 135, 230, 231, 240, 245, 250, 2500, 253, 35, 4500, 50; Industrials: 20, 20C, 30B, 30D, 30E, 40, 203, 205, 2135, 2200; Forklifts: 2500, 4500. Replaces Massey Ferguson 193208M91, 518369M92, 527904M91, 773126M92, 527904M93, 527904M92, 773126V92. Replaces J.S. Barnes: 1000013, GC-5060-A-GA-7, GC-5060-A-GA-5, GC-5060-A-GA-2 NOTE: This pump is 4.00 inches deep. If you need a shallower pump order 527904M91 (Item #: 119845, Ref: 773126M92) $160.00

No
Picture
Power Steering Pump - For Massey Ferguson tractor models 35, 50, 135, 230, 231, 235, 240, 250, 253, Compatible with Massey Ferguson Construction and industrial models 20, 20C, 30, 30B, 30D, 30E, 40, 203, 205, 2135, 2200, 2500, 4500, Replaces Massey Ferguson OEM number 1695922M1, 773126M1, 773126UK, Reservoir Diameter: 6", Reservoir Depth: 4", For Smaller Reservoir use # 527904M91, Includes: Internal Filter, (Item #: 174372) $245.00

Power Steering Pump Filter - Measures 1.02 inches inside diameter, 2.99 inches outside diameter, 1.61 inches height. For tractor models 11, Pony, 16, Pacer, 175, 180, 20, 202, 204, 2135, 2155, 2200, 230, 235, 245, 30, 302, 303, 304, 30B, 30D, 3165, 333, 35, 4500, 50, 50D, 555, 555D, 55D, 55G, 55K, 55LP, 65, 85, 88, Colt, FE35, FE35X, 50, Mustang, Pacemaker, TO30. VERIFY MEASUREMENTS of old filter. Replaces 1008553M1, 1052262M91, EP3, P183. (Item #: 111126, Ref: AE33538A) $12.60

Power Steering Pump O-Ring - Used on Barnes power steering pumps. This o-ring should be replaced with changing your filter. Replace OEM numbers 70923825, 1055980M1, 359117X1 (Item #: 178036, Ref: 1055980M1) $2.20

Power Steering Pump with Reservoir - For tractor models MH50, TO35, 135, 202, 203, 204, 2135, 35, 40, 50, 65, (150 AG GAS (CONT ENG)GAS/DSL). Replaces part number 182493M92, 191277M91, 191423M92, 191426M91, 191486M91. Pump comes with internal relief valve. (Item #: 112571, Ref: 544443M91) $535.14

Power Steering Rack - This Power Steering Rack is used on 35, 135, 20, 2135 Tractors. It replaces 1041937M1 (Item #: 179589, Ref: 1041937M1) $93.00

Power Steering Rack Stop Plate - This Power Steering Rack Stop Plate is used on 35, 135, 20, 2135 Tractors. It replaces 1751664M1 (Item #: 173337, Ref: 1751664M1) $28.00

Power Steering Rack, Pin, Rod Kit - For tractor models 135, 2135, 35, TO35. Power Steering Rack (1751665M1), Pin (1041936M1) and Rod (1751662M1). Kit also includes nut and snap ring (364449M1 and 355912X1 [X2]). (Item #: 1751665M1Kit) $158.00

Power Steering Valve Assembly - For tractor models TO35, 35, 135, Industrials 20, 35, (2135 Turf). Replaces 1755047M91. (Item #: 182808, Ref: 1018735M92) $775.00

Radius Rod Assembly - This Radius Rod replaces OEM 883295M91. For tractors 135, 135 UK, 20, 2135, 35. Center of bolt hole to center of ball is 38 5/8 inches. (Item #: 172966, Ref: 180771M91) $174.00

Rockershaft, Lower, Primary - For model FE35 and other UK built models. Item 15 in picture available as part number 1861583M1. Item 16 in picture available as art number 1850030M1. Please specify in comments section if needed. (Item #: 115523, Ref: 1850016M1) $117.38

Seal, Power Steering Pump Driveshaft - For tractor models 135, 20, 200, 20C, 20D, 20E, 2135, 2200, 230, 235, 240, 245, 250, 2500, 30B, 30D, 30E, 35, 40, 4500, 50, MH50, 65, TO30. Verify measurements of 1.002 inches outside diameter, .437 inches inside diameter and .375 inches in width. (Item #: 173648, Ref: 1751651M1) $6.30

Spindle Bushing - Spindle Bushing for tractor models 135, 148, 20, 20C, 2135, 230, 235, 240, 250, 35, FE135, FE35, TE20, TO20, TO30, TO35. Bushing Measures 1.395 inches outside diameter X 1.265 inches inside diameter X 1.5 inches long. (Item #: 102473, Ref: 180345M1) $2.80

Spindle Repair Kit - (4) 180345M1 bushings, (2) 18560X thrust bearings, (2) 180355M1 spindle dust seals. For tractor models FE35, TEA20, TED20, TEF20, TE20, TO20, TO30, TO35, 135, 20, 2135, 230, 235, 240, 240S, 35. (Item #: 104970, Ref: SBBSKIT01) $29.00

Spindle Thrust Bearing - This Spindle Thrust Bearing measures 1.250 inch inside diameter, 2-3/16 inch outside diameter, 5/8 inches deep. Replaces 195175M1. For tractor models 20, 2135, F40, FE35, MF135, MF150, MF165, MF230, MF235, MF245, MF35, MF50, MF65, TE20, TO20, TO30, TO35. (Item #: 102478, Ref: 18560X) $8.00

Spindle, LH - This spindle measures A=11 inch, B=1 1/4 inch, C=3/4 inch UNF. For tractor models TE20 serial number 49999 and up, 35, FE35, TEA20, TED20, TEF20, FE35, to serial number 368615, TO20, TO30, TO35. Also replaces OEM number 897415M91. The wheel bearing kit used for this spindle is part number WBKMF1. (Item #: 102472, Ref: 180349M92) $56.00

Spindle, RH - This spindle measures A=11 inch, B=1 1/4 inch, C=3/4 inch UNF. Fits tractor models TE20 serial number 49999 and above. 35, FE35, TEA20, TED20, TEF20, TO20, TO30, TO35, MF35. Also replaces OEM number 897414M91. The wheel bearing kit used for this spindle is part number WBKMF1. (Item #: 102471, Ref: 180346M92) $68.44

Steering Arm - For tractor models TE20, TEA20, TEF20, TO20, TO30, TO35, FE35, 135 UK, 135, 148, 230, 240, 250, 35. Replaces 180 350M1, 180350M1 (Item #: 102536, Ref: 180350M1) $33.30

Steering Box Assembly - Steering Box Assembly, for manual steering tractors. Length 17 inches. uses 1691798M1 steering wheel. Used on 231, 240, 250, 20D, 30E, 40E (Will also work on; 35, 50, 20, 135, 2135, 235, 202, 203, 204, 205 by ordering two 827690M1 'cup and lock ring sets' and 1691798M1 Steering Wheel.) Replaces 1673663M1, 1673663M91. Does not come with Mounting Gasket or Shifter Cups. (Item #: 161571, Ref: 1673663M1) $862.72

Steering Box Drop Arm - This is a Steering Box Drop Arm (Pitman Arm) used on Massey Ferguson 133, 135, 140, 145, 148, 152, 155, 158, 230, 235, 240, 245, 250, 255, 260, 35, 35X, all with 2 wheel manual Steering. Replaces original part numbers 3900210M1, 1850021M1, 220009089, 1220009089 (Item #: 105200, Ref: 1850021M1) $35.30

Steering Box Drop Arm - This Steering Gear Drop (Pitman) Arm is used on Massey Ferguson 133, 135, 140, 145, 148, 152, 155, 158, 230, 235, 240, 245, 250, 255, 260, 35, 35X. It replaces 1850022M1, 1850022V1 (Item #: 105201, Ref: 1850022M1) $44.80

Steering Column Adjustable Ball Race - Used on Massey Ferguson 135, 135UK, 148, 20D, 20E, 230, 231, 240, 250, 30E, 35, 35X, FE35 this part replaces 1850033M1 (Item #: 173340, Ref: 1850033M1) $20.50

Steering Column Felt Seal - This Steering Column Felt Seal is used on 133, 135, 140, 145, 148, 152, 158, 20D, 20E, 230, 231, 235, 240, 245, 250, 255, 260, 30E, 35, 35X, FE35. It Replaces 827210M1 (Item #: 178135, Ref: 827210M1) $1.70

Steering Column Grommet - New Steering Column Grommet fits Massey Ferguson 35, 202, 203, 204 and 205 (serial number 204181 and up). Grommet measures 3.660 inches length, 3.085 inches width and 1.480 inches hole inside diameter. Early tractors use smaller grommet. (Item #: 126707, Ref: 186627M1) $17.40

Steering Column Lower Bearing - Used on Massey Ferguson 135, 135UK, 148, 20D, 20E, 230, 231, 240, 250, 30E, 35, 35X, FE35, this bearing measures 0.845 inches inside diameter, 1.370 inches outside diameter, and 0.453 inches wide. Replaces OEM number 1850031M1, K903461 (Item #: 173343, Ref: 1850031M1) $10.00

Steering Column Seal - This Steering Column Seal is used on 35, 35X, 835, 133, 135, 140, 145, 148, 152, 158, 230, 231, 231S, 235, 240, 240P, 241S, 245, 250, 255, 260, 20D, 20E, 30E. It is 31mm (1.22047 Inches) x 4mm (0.15748 Inches). Replaces 1850234M1 (Item #: 173679, Ref: 1850234M1) $2.10

Steering Column Shim Kit - This Shim Kit contains 2 - .020 Shims, 2 - .010 Shims, 2 - .005 Shims. TO35, 100, 135, 2135 (industrial), and 35. Replaces 830627M91 (Item #: 179603, Ref: 8N3595KIT) $23.70

Steering Cylinder Ball Joint, Female - Rod end ball joint, with internal threads. For Tisco universal power steering cylinder 192749M92. For tractor models 20, 202, 203, 204, 205, 2135, 35, MF135. 1/2 - 20 NF Thread. Also Replaces OEM 1754629M1 (Item #: 172886, Ref: 192749FT) $20.30

Steering Gear Side Cover Gasket - Used on Burman (UK) steering gear assemblies on Massey Ferguson models 135UK, 148, 20D, 20E, 230, 231, 240, 250, 30E, 35, 35X, FE35 (Item #: 168939, Ref: 1850041M1) $2.00

No
Picture
Steering Rack Rod - For Massey Ferguson tractor models TO35, 35, 135, Compatible with Massey Ferguson Construction and industrial models 20, 2135, Replaces Massey Ferguson OEM number 1751662M1, Only for applications that have an updated steering rack., Will not replace original rod, Rod only, (Item #: 173650) $69.00

Steering Rocker Top Shaft - Shaft has 32 splines, 4 teeth and no adjustment slot on end. For tractor models 135, 148, 230, 240, 250, 35, FE135, FE35. (Item #: 151831, Ref: 1850017M1) $64.00

Steering Sector Kit - This Steering Sector Kit is for 1 side, 2 kits used per tractor. Kit contains adjuster bolt, nut, washer, o-rings, shims, and felt seal. (Adjuster Bolt is Allen Head Type, not slotted like original). For models 35, 135, 20 (Industrial), 35 (Turf and Utility), and 2135. Replaces 1023837M1, 180560M1, 180562X1, 22-456X, 353428X1, 353436X1, 353440X1, 830628M91, and 833455M1. (Item #: 178090, Ref: S.67109) $23.20

Steering Sector Shaft Bushing - Replacing OEM number 1850018M1, 21910014, this bushing has an inside diameter of 1.252 inches and an outside diameter of 1.382 inches. Used on Massey Ferguson 135, 145, 148, 155, 158, 165, 168, 175, 178, 185, 188, 20B, 20D, 20E, 230, 231, 235, 240, 245, 250, 30E, 35, 35X, FE35, 40, 65, 765. (Item #: 168937, Ref: 1850018M1) $10.80

Steering Shaft Assembly - For TO35, 35, 135, 202, 203, 204, 205, 2135 with Manual Steering. 21 3/8 inches Long. (Item #: 165143, Ref: 180538M91) $189.00

Steering Shaft Bearing Assembly - For Steering Column (without Power Steering). Tractors: TE20, TEA20, TO35, 35, 135, 20, 2135. Replaces original part number 180528M91. (Item #: 124501, Ref: 8N3517) $24.00

Steering Shaft Bearing Cone - Upper/lower. For tractor models 135, 2135, 35, Super 95, TO35. All with manual steering. Replaces OEM 180549M1. (Item #: 111857, Ref: 8N3571-OE) $12.50

$Massey Ferguson 35 Steering Shaft Bearing Cone - Upper\Lower$
Steering Shaft Bearing Cone - Upper/Lower - For Massey Ferguson tractor models TO35 (manual steering), 35 (manual steering), 95 (manual steering), 135 (manual steering), Compatible with Massey Ferguson Construction and industrial models 2135 (manual steering), Replaces Massey Ferguson OEM number 180549M1, For Steering Shaft Bearing Cup - Upper/Lower use Item #: 111857, (Item #: 173671) $13.50

Steering Shaft Bearing Cup - Upper/lower. For tractor models 135, 2135, 35, Super 95, TO35. All with manual steering. Replaces OEM 180526M1. (Item #: 173338, Ref: 8N3552) $13.10

No
Picture
Steering Shaft Bearing Cup -Upper/Lower - For Massey Ferguson tractor models TO35 (manual steering), 35 (manual steering), 95 (manual steering), 135 (manual steering), Compatible with Massey Ferguson Construction and industrial models 2135 (manual steering), Replaces Massey Ferguson OEM number 180526M1, O.D.: 1.7515", Width: .390", For Steering Shaft Bearing - Upper/Lower use Item #: 111857, (Item #: 173670) $20.80

Steering Shaft Bearing Kit - Used on Massey Ferguson 135, 135UK, 148, 20D, 20E, 230, 231, 240, 250, 30E, 35, 35X, FE35. Replaces 13535X, 1850053M1, 1850032V1, 1850053M91, 1850031M1, 1850032M1, 1850033M1, 1850034M1 (Item #: 179637, Ref: 13535X) $22.30

Steering Shaft Bearing and Cup Assembly - Upper/lower. For tractor models 135, 2135, 35, Super 95, TO35. All with manual steering. Price is for one set. 2 required per steering shaft/top and bottom. Replaces OEM 180549M1 and 180526M1. (Item #: 111857, Ref: 8N3505) $12.50

Steering Shaft Repair Kit - Repair kit for Steering Shaft. For Tractors with Power Steering. Services shafts where upper oil seal has worn a groove into shaft causing oil to leak from upper housing. (Item #: 173253, Ref: SRK632AA) $47.40

Steering Shaft Seal - 49/64 inch X 1 3/8 inch X 25/64 inch. For tractor models 135, 20, 202, 203, 204, 205, 2135, 230, 235, 245, 35, TO35. Replaces 1876951M1. (Item #: 172323, Ref: 1751702M1) $8.80

Steering Shaft and Nut Assembly - For Power Steering on TO35, 35, 135 (>serial number 641016186), 2135 (prior to serial number 646001410). Shaft measures 21 3/4 inches overall length. Replaces 1751666M1, 1751666M91. (Item #: 182854, Ref: 1751666M91) $218.77

Steering Wheel - For TO20, TO30, TO35, 35, 135, F40, 50, and 65. 17-3/4 inch diameter, 3/4 inch hub with 3/16 inch keyway. Covered Metal Spokes. (41486S) (Item #: 122474, Ref: 180576M1) $25.00

Steering Wheel - Original Type - For tractor models TE20, TEA20, TO20, TO30, TO35, 20, 35, 135, 50, 65, 2135. 17-3/4 inch diameter, 3/4 inch hub with 11/16 inch keyway. Metal Spokes. (Item #: 101418, Ref: 180576M1-OE) $27.70

Steering Wheel Nut - Zinc Plated Steel Nut, Steering Wheel Acorn Style. 5/8 - 18 NF thread. 1.132 inches tall. 1 inch wrench size. Replaces 207562, 70207562, 913133, 351103-S, 351103S, 751454R1, AL2315T, 195592M1 (Item #: 183746, Ref: 351103S) $4.10

Steering Wheel Nut, Chrome - Chrome, Domed. For tractor models TE20, TEA20, TEF20, TO20, TO30, TO35, FE35, F40, 20, 202, 203, 204, 205, 50E, Pony, Super 90, 135, 135 UK, 270, 283, 290, 298, 35. Repalces OEM 195592M1. Head uses a 1 1/8 inch wrench. (Item #: 150988, Ref: 351103CC) $8.10

Steering Wheel Washer - This steering wheel washer is 1.497 inch outside diameter, 0.645 inch inside diameter and is 0.180 inches thick. It is used on F40, TE20, TO20, TO30, TO35, 135, 35, 50, 65, 85, 88, 202, 204, 2135. Replaces 180577M1, 180577V1, TO3673. (Item #: 179684, Ref: 180577M1) $4.40

Steering Wheel, Keyed - Comes with triangular cap, black plastic. 16 inch with keyed shaft. For tractor models: 35, 135. (Item #: 178550, Ref: 189448M1) $39.60

Tie Rod - For Massey Ferguson tractor models 20, 35, 135, 202, 203, 204, 205, 302, 304, 2135, Compatible with Massey Ferguson Construction and industrial models 202, Replaces Massey Ferguson OEM number 1754629M91, Diameter: 0.531", Length: 1.156", (Item #: 166505) $23.40

Tie Rod Assembly - Drag Link Assembly. For the following tractors: 135 DELUXE/SPECIAL, 20 TURF, 2135 TURF, 230 SWEPT AXLE with serial number to 9A349239, 235 STANDARD SWEPT AXLE, 35, TO35. Includes Ties Rod Ends 193733M91 and 180507M91 and Tie Rod. Length, overall 39.5 inches end to end. (Item #: 105107, Ref: 180780M92) $70.00

Tie Rod End - Replaces OEM number 194606M91. 3.250 inches long, .687 inch diameter, 18 right hand thread. For tractor models 135 early, 30, 35, TEA20, TEF20, TED20, TO20, TO30. Has Zerk Fitting and Castle Nut. Replaces 180381M91, 180507M91, 1862029M91, 194606M91. (Item #: 105035, Ref: 180381M91) $12.50

Tie Rod End, Front - Drag link end assembly, front. 3.75 inch to center of post, .812 inch-16 right hand thread. For drag links with adjustable end. For tractors: F40, MH50, MF50, MF65, MF135 Orchard, Deluxe and Special, MF150, MF165, MF175 industrials: 20, 35 utility, 202, 203, 204, 205, 356 tractors. Replaces: 182534M1, 182534V91, 847451M91, 884701M92 (Item #: 102503, Ref: 182534M91) $13.70

Tie Rod End, LH Thread - 3.312 inches in length, .687 inch diameter 18 left hand thread. For tractor models 135, 20, 2135, 230 swept axle serial number <-9A349239, 235 swept axle, 35, TO35. If you have a Jam Nut style tube (as opposed to clamping style), and need to replace the nut, it is available separately as part number 193068M1. Replaces 180391M91, 193733M91, 193733V91, 194607M91. (Item #: 105108, Ref: 193733M91) $15.90

Tie Rod End, RH Thread - 3.60 inches in length, .687 inch diameter 18 right hand thread. For tractor models 135, 20, 2135, 230 swept axle serial number <-9A349239, 235 swept axle, 35, TO35. (Item #: 105109, Ref: 180507M91) $22.50

Tie Rod Tube - Tie Rod Tube. Length: 34.810 inch. 11/16 (.687) - 18 thread RH one end and LH on other. For: 135 Deluxe/Special, 230 Swept Axle to serial number 9A349239, 235 Swept Axle, 35, TO35. (Item #: 105110, Ref: 193069M1) $61.00

Tie Rod, Long - 29.50 inches in length, 1.187 inch diameter, with 7 cross holes. For tractor models 25, 35 all with HD wide adjustable axle. (Item #: 104688, Ref: E2NN3280BA) $103.98

Tie Rod, Short - 3.182 inches in length, 1.0 inch diameter, 16 thread. For tractor models 25, 35 all with HD wide adjustable axle. (Item #: 104691, Ref: E2NN3289BA) $86.00

Wheel Hub - Front Wheel Hub. Six bolt. For the following tractors: 35, 50, 65, MH50, TE20 (serial number to 49998 and 52497-52565), TO30, TO35. Replaces 180338M91, 898085M91. (Item #: 133657, Ref: 180338M92) $34.98

Universal Parts and Accessories
Category: Steering

Eaton Power Steering Pump Replacement - This Power Steering Pump replaces the Eaton style belt driven Power steering Pump. It also replaces Eaton part numbers: 503-1005-005, 20928 and P761. This is a Redesigned Pump that uses a bearing instead of original bushing. It can also be adapted to tractors using Char-Lynn Power Steering with an Eaton Pump. Please note that this pump does not include brackets, top mounted reservoir, or pulley. Some applications will require a new pressure hose to be made for a 5/8-18 inch inverted flare type fitting. The shaft diameter measures .670 inches. The shaft length, where the pulley mounts measures .575 inches. There is a 2 inch thick pump housing where the bracket bolts on. Pressure is preset at 1.32 GPM. (Item #: 113730, Ref: S03-1003) $398.00

Filter, Power Steering - Filter case size is 3 inches diameter and 1 1/2 inch height. Center hole is approximately 7/8 inch diameter. VERIFY size before ordering. It is used on tractors with Eaton style power steering pumps. Replaces: 1008553M1, 1052262M91 (Item #: 111126, Ref: AE33538A) $12.60

Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Item #: 164438, Ref: ABC1417) $48.20

Steering Wheel Spinner, Bare Aluminum - Comes with mounting hardware. (Item #: 108667, Ref: R3275) $8.00

Steering Wheel Spinner, Blue - Comes with mounting hardware. (Item #: 108664, Ref: R3279) $8.60

Steering Wheel Spinner, Green - Comes with mounting hardware. (Item #: 108666, Ref: R3278) $13.40

Steering Wheel Spinner, Orange - Comes with mounting hardware. (Item #: 108660, Ref: R6323) $8.50

Steering Wheel Spinner, Red - Comes with mounting hardware. (Item #: 108663, Ref: R3277) $8.90

Steering Wheel Spinner, Yellow - Comes with mounting hardware. (Item #: 108665, Ref: R3280) $8.24

Tie Rod Boot Assortment - Includes 6 Tie Rod Boots. Two each of the following sizes: 1 13/16 inches x 5/8 inch x 5/8 inch, 1 15/16 inches x 3/4 inch, 3/4 inch, and 1 3/8 inches x 1 inch x 1/2 inch. (Item #: 183427, Ref: TIERODBOOTS) $13.00

No
Picture
Wheel Spinner- Black - Wheel Spinner, black knob, universal. WSV124B (Item #: 108662, Ref: R3276) $9.60

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Steering

[Categories] [All MF35 Parts] [All Massey Ferguson Models]

Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT

Order online
anytime!

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy