Anonymous-0
Well-known Member
It was warm enough to go play outside today. Thain chain and all the sprockets come from an old JD combine. Its run by the hyds off the 1105 massey 
- Thread starter Anonymous-0
- Start date
Anonymous-0
Well-known Member
ts out in the snow bank now, I was going to try it on the mill but it has a 1000 PTO and I need a 540 to supply the power for it. Hey steve can you reverse the PTO shaft on that 06???
Anonymous-0
Well-known Member
well ell, just saw twice as fast! Dang kids, have to tell em everything.
My father put together a mill about 1950. He first installed a
blower from a threshing machine to handle the sawdust. It had two
problems:
1. bark and slivers would land over the inlet and clog up
2. When the mill was idling (a 1 man and a boy operation) to turn
the log, or put a new log on the carriage, the blower was too slow
to pick up and move sawdust. You learn quickly that green sawdust
is much heavier and sticky than dry sawdust.
He converted to a chain drag such as yours. Solved both problems
- your setup looks very functional.
blower from a threshing machine to handle the sawdust. It had two
problems:
1. bark and slivers would land over the inlet and clog up
2. When the mill was idling (a 1 man and a boy operation) to turn
the log, or put a new log on the carriage, the blower was too slow
to pick up and move sawdust. You learn quickly that green sawdust
is much heavier and sticky than dry sawdust.
He converted to a chain drag such as yours. Solved both problems
- your setup looks very functional.
Similar threads
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy