9n- drawbar

Anonymous-0 · Sep 7, 2012

The draw bar on my 9n worked fine and now all of a sudden it won"t move.

jackinok · Sep 7, 2012

wont move how? wont raise/lower? rotate? swing sideways? IF it wont raise,pull round inspection plate off right side of tractor and see if when you move touch lever that control arm moves. if it does,reach down inside with everything off and see if it has become loose from control valve in pump. if it doesnt and its attached to control valve try to move valve by hand. they can stick. try this first and let us know. problem could be in cover ,blown gaskets,leaks etc but this is what to check first in my opinion.sounds stupid but do you have the pto on? pump wont work without it.

rrlund · Sep 7, 2012

Did you remember to turn on the PTO?

buickanddeere · Sep 7, 2012

A real drawbar doesn't move. It's firmly fixed to the main tractor housing.
Less chance of the flip over vs a lower three point arm drawbar . Which is farther back from the rear axle and can be raised too high.
Wagons steer better when the drawbar isn't slopping from side to side.

doubleN · Sep 7, 2012

buick and dearborn-

You 'da man!!

9n- drawbar

Anonymous-0

Well-known Member

jackinok

Well-known Member

rrlund

Well-known Member

buickanddeere

Well-known Member

doubleN

Member

Similar threads