(800) 853-2651
SHOP NOW

3010 John Deere hydraulics

S

Sarge E6

New User
I put a John Deere 148 loader on my 3010. I only had single hydraulics so I bought a LV22RFSTKA2B "Brand" joystick with a closed center and float. I replaced the elbow on the right side of the tractor, under the brakes, with a Tee and hooked the pressure line into it. the
Raising, lowering, dumping or curling the bucket work great, but when I put it in float the engine lugs down???
I also replaced the cover on the filter with the newer style and hooked in a 3/4 inch return line to it.
Thanks for your help
Tony
 

Welcome to YT
If placing loader control valve lever in float position causes engine to lug down then control valve is creating this issue. Technically when control lever is in float that's designed to allow oil from each ends of boom cylinders to freely exit allowing boom to move up or down with terrain. Pressure & return ports on valve should be blocked by the valve spool when spool is in float position.
 
You must log in or register to reply here.

Similar threads

T
adding a loader
Replies
9
Views
788
Tx Jim
Tx Jim
J
Bleeding Hydraulics on a John Deere 2640
2
Replies
21
Views
1K
JohnGough
J
J
john deere 148 loader
Replies
19
Views
2K
Jim.ME
J
J
3010 John Deere hydraulic issuesd
Replies
15
Views
917
flying belgian
F
T
1962 John Deere 3010 Gas Tractor Starting Issue
Replies
4
Views
428
8850dave
8
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top