Some more videos

connor9988 · Mar 15, 2021

Got cold again here and some more snow so how about some videos for everyone?

<iframe width="560" height="315" src="https://www.youtube.com/embed/mTHoiC3gR7I" frameborder="0" allow="accelerometer; autoplay; clipboard-
write; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe>

<iframe width="560" height="315" src="https://www.youtube.com/embed/erRKgf-NWyU" frameborder="0" allow="accelerometer; autoplay; clipboard-
write; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe>

<iframe width="560" height="315" src="https://www.youtube.com/embed/CbI7Ajz20Xk" frameborder="0" allow="accelerometer; autoplay; clipboard-
write; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe>

<iframe width="560" height="315" src="https://www.youtube.com/embed/ifv7eAq4Mrc" frameborder="0" allow="accelerometer; autoplay; clipboard-
write; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe>

rusty6 · Mar 15, 2021

The A6 combine and DC4 is the same as my dad was running in the late 40s. He only had the DC4 a year and then moved up to a John Deere D. Wisonsin power on the combine and the D could idle along as slow as needed in low gear.

connor9988 · Mar 15, 2021

We try to do our best to stay on top of the V4 maintenance so she purrs in the field.

rusty6 · Mar 15, 2021

(quoted from post at 19:39:13 03/15/21) We try to do our best to stay on top of the V4 maintenance so she purrs in the field.

You did well. My dad spent days trying to start that stubborn Wisconsin engine when he was supposed to be harvesting. Its gone on to power the firewood saw at my brother's place now and he has it tuned up to start pretty good.
I've got a DC4 in the shed that has not run in years. Very hard starting tractor.

fastfarmall · Mar 15, 2021

What i heard happen is the is the coil don't put out any juice[or less] when there warm or hot,so as soon as it cools down, it will start.We never owned one, just what i heard!

connor9988 · Mar 15, 2021

we DID experience that initially. The condenser would get hot, swell, and short out on the mag casing. It would go one pass (approximately)
and then shut down and we could not get it started until it cooled off and then start the process over again. We put a new condenser in and it runs very well.

Loosehandle · Mar 16, 2021

Magneto has to be in good condition
helps a lot

Some more videos

connor9988

Well-known Member

rusty6

Well-known Member

connor9988

Well-known Member

rusty6

Well-known Member

fastfarmall

Well-known Member

connor9988

Well-known Member

Loosehandle

Well-known Member

Similar threads