Planter harness 37 pin connector - Precision Planting ve

andy r · Apr 14, 2022

I posted this in implements as well, but not getting any replies. I purchased a planter and the seller kept his Precision Planting 20/20 monitor. Is the 37 pin connector from this planter that connected to his Precision Planting monitor going to work on the monitors I all ready have? I have Kinze 1000 and 2000 monitors which are Dickeyjohn and a John Deere 300 ComputerTrac Monitor. What I have learned is that Dickeyjohn monitors and John Deere branded monitors powered the harness/seed sensors a little different by putting the + and - power to different pins. An adaptor can be purchased to make them all work together. If some one could tell me that a Precision Planting monitor uses the same or different power pins as either an old Dickeyjohn/Kinze or a John Deere monitor that would help. The seed tubes on this planter are the Dickeyjohn traditional light sensors but are the 3 bulb high rate. Thanks for the help.

used red MN · Apr 14, 2022

Go to New AgTalk at the link and register there and post it on Machinery Talk. You will have much better luck there. If need be they have a Precision Talk section.
AgTalk

Wisconsin Cowman · Apr 14, 2022

Check with these people they probably have something.
Poke Here

Huskergreen · Apr 14, 2022

Check with Ag Express Electronics in Grand Island NE, they have a couple other locations also. Grand Island phone is 308-381-2905. They know their stuff.

paul · Apr 15, 2022

Ag express can hook you up with an adaptor plug that makes things work. They are good people.

Paul

Planter harness 37 pin connector - Precision Planting ve

andy r

Member

used red MN

Well-known Member

Wisconsin Cowman

Member

Huskergreen

Member

paul

Well-known Member

Similar threads