allis chalmers G carburetor

1elkbuglr

New User
i recently removed the discharge needle from my MS carburetor and noticed 2 drilled holes on the side. one is through the body and the other through one side. Is there any need to orient these holes in the carburetor housing or should i just tighten them?
 
No need, or there would be specific alignment procedure or internal stops. the holes should be clean but not enlarged. Jim
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top