(800) 853-2651
SHOP NOW

calling VAClee nuther allis ?

glennster

glennster

Well-known Member
ok got the manifold drilled out, fitted the muffler but it sits way too low and will interfere with the hood. hole in hood will not clear the large diameter of the muffler. looks like there must be some type of extension on the allis b to raise the muffler up and out of the hood.
 
If my memory serves me correctly the original muffler on Allis B and C fit under the hood with jst a small part protruding above the hood. I think you are putting on a muffler that a CA Allis used. CA Allis had a muffler which the muffler part was outside the hood. Probably just need a small extension.
 
Click on the following link which takes you to Allis forum and show original B muffler.
http://www.ytmag.com/cgi-bin/viewit.cgi?bd=ac&th=121869
 
i see the link now, the original muffler went under the hood. looks like some fabricating gonna be going on.
 
glennster,
Looks like you need a double digit Oliver to get the "hang" of this! Looking good.
Jim
 
There are 2 different upright mufflers available. The one with the longer bottom section probably is a retrofit for early models. I have always been under the impression that when the CA came out that the B also was changed to the style with the short bottom section. All of the ones I have and have worked on from around 1951 and later had the big hole in the hood that appears to be factory. If not someone done a very nice job cutting them. There is also another style brace that came out before the one you have that bolted to 2 of the valve cover bolts and had a clamp that attached it to the body of the muffler. Unfortunately I do not have one on site now to take a picture of it. I have also learned over the years that it is impossible to be 100% sure of anything when it comes to tractors and what the factory done at times. Lee
a7765.jpg
 
You must log in or register to reply here.

Similar threads

D
Allis 190 won't run
Replies
10
Views
399
herk
H
S
Wet Stacking Question
Replies
11
Views
1K
buickanddeere
B
M
MF35 Petrol/TVO running very poorly
Replies
3
Views
330
Ericp351
E
D
Aftermarket downhill only carburetors
Replies
4
Views
411
Dave G9N
D
V
new owner of a 620, will try to update this as we go.
2 3 4
Replies
61
Views
4K
valiant8086
V
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top