Farmall & IHC Tractors Discussion Board |
Re: IHC 300 Utility Hydraulics Questions
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Ken in Iowa on August 17, 2001 at 19:43:13 from (32.100.141.181):
In Reply to: IHC 300 Utility Hydraulics Questions posted by Carsen on August 17, 2001 at 15:47:39:
Carsen: I have owned a 300U with loader since about 1975. My pump is original with about 5000 hours and it works fine. This tractor has been used with fast-hitch equipment many years in the fields of my farm and now the loaders is used year around. One problem I had was plugging of the screen in the reservoir under the seat. When the screen was plugged oil flow was greatly limited. It's heavy for an old man to remove the reservoir so the second time it happened I removed the internal screen and added a large capacity industrial type hydraulic oil filter in the return line to the pump on the right side near the engine block. That solved the problem and the screw-off filter is easy to change. The filter kit was available through NAPA. Good Luck, Ken
Follow Ups:
Home
| Forums
Today's Featured Article -
Earthmaster Project Progress Just a little update on my Earthmaster......it's back from the dead! I pulled the head, and soaked the stuck valves with mystery oil overnight, re-installed the head, and bingo, the compression returned. But alas, my carb foiled me again, it would fire a second then flood out. After numerous dead ends for a replacement carb, I went to work fixing mine.I soldered new floats on the float arm, they came from an old motorcycle carb, replaced the packing on the throttle shaft with o-rings, cut new ga
... [Read Article]
Latest Ad:
Nice Marvel Schebler DLTX 8 bronze body carburetor For 1934-1936 unstyled A tractor.Serial No.410000-42850. All restored and ready to use.
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|