Farmall & IHC Tractors Discussion Board |
Farmall H Applied Physics
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by City-Boy McCoy on February 21, 2007 at 15:44:38 from (65.0.139.125):
Howdy, Boys: I am about to start operating my narrow front Super H on the farm (there are some hills) and I have a strong awareness of the ability of these row crops to tip over. In giving it more thought, it occured to me that anything which lowers the center of gravity will reduce the probability of tipping over. So, wheel weights should make some difference, even though they are on centers with the rear axles - right? Also, it seems to me, a 3-point hitch (pulling an implement) would also reduce the chance of tipping. Example: it I was pulling a brush hog with a 3-point, the tractor would also have to lift the off-side of the mower, which is down on the ground, in order to tip - correct(?) - whereas with a drawbar hitch, the tractor would already be gone before the clevis twisted enough to lift the off-side of the mower? Seems like the 3-point, in that case, would make the tractor somewhat less likely to tip. Some of you "gray-heads" with experience, please tell me if I am thinking right about this.... Still, I'm not taking any chances with me or my tractor. I have a lot of respect, and fear, of the high center of gravity of these old row crop machines. Thanks. mike
Replies:
Home
| Forums
Today's Featured Article -
Earthmaster Project Progress Just a little update on my Earthmaster......it's back from the dead! I pulled the head, and soaked the stuck valves with mystery oil overnight, re-installed the head, and bingo, the compression returned. But alas, my carb foiled me again, it would fire a second then flood out. After numerous dead ends for a replacement carb, I went to work fixing mine.I soldered new floats on the float arm, they came from an old motorcycle carb, replaced the packing on the throttle shaft with o-rings, cut new ga
... [Read Article]
Latest Ad:
Nice Marvel Schebler DLTX 8 bronze body carburetor For 1934-1936 unstyled A tractor.Serial No.410000-42850. All restored and ready to use.
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|