Farmall & IHC Tractors Discussion Board |
Re: Harold H.- B450
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Harold H on July 05, 2003 at 19:59:16 from (205.188.209.140):
In Reply to: Harold H.- B450 posted by Redfan on July 05, 2003 at 02:04:14:
Thanks for the info. Usually, if the top has the extra 3 bolt hole on a US tractor it would have the casting underneath to mount reversed shifter forks. Sometimes the casting would be machined and drilled for the forks and sometime not. I would be curious on the B-450 which is the case, or if it is even cast for reversable forks. I havn't actually seen a Farmall B-450 in probably close to 30 years and I checked with the remaining Case/IH dealership at my old home in Mississippi, which is the old Case dealership, several years ago and they have never seen a parts book on a B-450. I just always liked the B-450 and this reversable top idea surfaced when we were talking about cotton picker tractors with Guy Fay a couple of days ago. Harold
Follow Ups:
Home
| Forums
Today's Featured Article -
Earthmaster Project Progress Just a little update on my Earthmaster......it's back from the dead! I pulled the head, and soaked the stuck valves with mystery oil overnight, re-installed the head, and bingo, the compression returned. But alas, my carb foiled me again, it would fire a second then flood out. After numerous dead ends for a replacement carb, I went to work fixing mine.I soldered new floats on the float arm, they came from an old motorcycle carb, replaced the packing on the throttle shaft with o-rings, cut new ga
... [Read Article]
Latest Ad:
Nice Marvel Schebler DLTX 8 bronze body carburetor For 1934-1936 unstyled A tractor.Serial No.410000-42850. All restored and ready to use.
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|