Farmall & IHC Tractors Discussion Board |
Re: M Live hydraulics pump choices
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by T.B.W. on January 04, 2005 at 15:36:50 from (4.248.246.198):
In Reply to: M Live hydraulics pump choices posted by chris in LNK NE on January 04, 2005 at 11:27:46:
The IH live pump from a super M 400 and 450 will work. I tried to change the front cover on my 49 M, but couldn't get the front pully off. The bottom 2 bolts of the pump fit, it is the top 2 that are off a little. I took 2, 3/8 eye bolts and opened the eyes enough to put the end of the eye in the top holes and ran a bolt through the hole in front of the the oil fill. Made a bracket for the eye bolts to hook to. Painted it red and it works fine. unless you look hard, you don't see the eye bolts. I know its not the way IH intended it, but I use this tractor and needed the live hydraulics. Love the M with the live pump. When you put the pump in, there is a punch marks on the pump gear and the timing gear. line them up. make sure you have the motor on TDC before you take the distributor off and it will line up easy
Follow Ups:
Home
| Forums
Today's Featured Article -
Earthmaster Project Progress Just a little update on my Earthmaster......it's back from the dead! I pulled the head, and soaked the stuck valves with mystery oil overnight, re-installed the head, and bingo, the compression returned. But alas, my carb foiled me again, it would fire a second then flood out. After numerous dead ends for a replacement carb, I went to work fixing mine.I soldered new floats on the float arm, they came from an old motorcycle carb, replaced the packing on the throttle shaft with o-rings, cut new ga
... [Read Article]
Latest Ad:
Nice Marvel Schebler DLTX 8 bronze body carburetor For 1934-1936 unstyled A tractor.Serial No.410000-42850. All restored and ready to use.
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|