Farmall & IHC Tractors Discussion Board |
Re: Front end loader from Int 414 - will it fit a
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by George 2 on December 18, 2005 at 08:14:02 from (216.46.141.114):
In Reply to: Front end loader from Int 414 - will it fit a 354? posted by Greg Beale on December 18, 2005 at 01:38:34:
The 1501 loader from a B414 will not fit a 354 because the rear mount is a bar across the loader mount and bolted to the top of the transmission housing. That same mount on the transmission housing is used to support the instrument panel on the 354. The later 1501 on the 434,444(UK), and the 1550 on the 354, 444(UK), and 384 will fit the 354. This loader mount at the rear on the side frame bolt mounts on the side of the clutch housing. Note that some B250, B275, and B414 tractors were later fitted with this later version of the 1501 loader and they would fit. In addition there is a different set of loader mounting frames for the American made 424 and 444 (US) tractors. Those won't fit either as the front mount is different. Note also that any of these 3 loader frames can be made to fit anything if you are willing to modify the mounting frames
Replies:
Home
| Forums
Today's Featured Article -
Earthmaster Project Progress Just a little update on my Earthmaster......it's back from the dead! I pulled the head, and soaked the stuck valves with mystery oil overnight, re-installed the head, and bingo, the compression returned. But alas, my carb foiled me again, it would fire a second then flood out. After numerous dead ends for a replacement carb, I went to work fixing mine.I soldered new floats on the float arm, they came from an old motorcycle carb, replaced the packing on the throttle shaft with o-rings, cut new ga
... [Read Article]
Latest Ad:
Nice Marvel Schebler DLTX 8 bronze body carburetor For 1934-1936 unstyled A tractor.Serial No.410000-42850. All restored and ready to use.
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|