Farmall & IHC Tractors Discussion Board |
Re: Delco Alt. 1 wire to 3 wire
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by SuperA-Tx on February 14, 2007 at 16:22:26 from (4.227.107.121):
In Reply to: Re: Delco Alt. 1 wire to 3 wire posted by Bob on February 14, 2007 at 15:57:47:
So theres no way to tell if it will work or not then without doing it and see if it works. One other thing is when I couldnt get it to excite before I had the pulley changed I took it to a car garage down the street and the guy there added a wire from either the #1 or #2 pin to the BAT and it excited the Alt but it would run the battery down when the tractor wasnt running showing a dis-charge of about 4 amps. After it did that I decided to take that wire off he had added and took it to an alternator shop and had the smaller pulley put on. Is that warning light or diode what keeps the battery from dis-charging? It isnt something that HAS to be fixed but just someting I was thinking about I might change if it was a simple as adding the two wires and the diode. Maybe I should just leave well enough alone but with this cold weather there isnt much to do.
Replies:
Home
| Forums
Today's Featured Article -
Earthmaster Project Progress Just a little update on my Earthmaster......it's back from the dead! I pulled the head, and soaked the stuck valves with mystery oil overnight, re-installed the head, and bingo, the compression returned. But alas, my carb foiled me again, it would fire a second then flood out. After numerous dead ends for a replacement carb, I went to work fixing mine.I soldered new floats on the float arm, they came from an old motorcycle carb, replaced the packing on the throttle shaft with o-rings, cut new ga
... [Read Article]
Latest Ad:
Nice Marvel Schebler DLTX 8 bronze body carburetor For 1934-1936 unstyled A tractor.Serial No.410000-42850. All restored and ready to use.
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|