Farmall & IHC Tractors Discussion Board |
Re: IH paint problems..HELP!!!!!!
[ View Follow Ups ] [ Post Followup ] [ Return to Farmall & IHC Tractors Discussion Board ]
Posted by Randy on April 15, 2000 at 07:58:48 from (208.156.163.167):
In Reply to: IH paint problems..HELP!!!!!! posted by gary on April 15, 2000 at 07:28:11:
I'am not a paint expert but I just finished two 66' series tractors and they turned out well. I used an Iron oxide primer, it covers better because its dark. I used IH 2150 red/rouge paint with thinner that dries fast and can be put on down to 50 degrees. I put on first coat real lite as to cause a tackiness, let sit for about 5 min, then go back and put on a wet looking coat, sprayer about 6 to 8 inches from metal and long steady strokes with the gun, let sit a little longer and go back and wet coat again. Make sure your not thinning paint down to far, try less thinner, practice on something else first. I would make sure you have in line moisture filter on compressor and regulate pressure according to sprayer manual.
Follow Ups:
Home
| Forums
Today's Featured Article -
Earthmaster Project Progress Just a little update on my Earthmaster......it's back from the dead! I pulled the head, and soaked the stuck valves with mystery oil overnight, re-installed the head, and bingo, the compression returned. But alas, my carb foiled me again, it would fire a second then flood out. After numerous dead ends for a replacement carb, I went to work fixing mine.I soldered new floats on the float arm, they came from an old motorcycle carb, replaced the packing on the throttle shaft with o-rings, cut new ga
... [Read Article]
Latest Ad:
Nice Marvel Schebler DLTX 8 bronze body carburetor For 1934-1936 unstyled A tractor.Serial No.410000-42850. All restored and ready to use.
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|