I only have a 86, but if I recall correctly they both have the "pull" knob for lights and twist knob for the wipers.
On the light switch, there is 2 ways.. 1) look under the dash at the light switch.. somewhere there should be a little "button".. Push it in and pull the knob and the knob and the rod the knob is on should both come out.
2) look around the innermost part of the knob, somewhere there will be a little notch.. take a small instrument, go through the notch, and push towards the outside.. There is a little "clip" that will allow the knobs to be pushed on, but not pulled off unless it's pushed in, loosening it up on the "rod" (this will be the same on either light or wiper switch)
Again, this is based on my 86.. Can't say I have really ever paid attention to one newer.. So it may not be the same on yours.. I almost want to say on my 95 the wipers and such are on the column.. (only been in the truck twice since I brought it home 3 years ago.. Maybe this winter I'll get around to it)
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Engine Valves - Some Helpful Information - by Staff. Intake - On the intake stroke the piston moves doward, sucking in carburized fuel through the open intake valve. Exhaust valve is closed. Compression - With both the intake and exhaust valves closed, the pistons upward stroke compresses or squeezes the fuel into the combustion chamber. Firing - Ignited by the spark, the compressed fuel explodes and forces the piston downward on its power stroke. Intake and exhaust valves are closed. Exhaust valves and seats are exp
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
