OP, I was in your shoes about 8 years ago. I bought 40ac of mostly scrub. It came with a Ford 8N. I still have the 8N, and it does a moderately decent job with utility work. Having said that, it's low on power, not very comfortable, and it's rather finicky to get jobs done. To be expected, it's 60 YO technology, and you have to put up with it. On the up-side, in the years I've had it the only thing that's gone wrong has been the gen went bad - and that was my fault for getting it sunk. Everything else dried out and worked fine but the gen had to be replaced. It is stone-dead reliable.
A few years ago, I bought a mid-60s JD 2010 for peanuts. It's more comfy, has plenty of power, safer, and the times I would NEED 4WD were times I had no desire or business being out in the acreage. If you have to go out in the muck, and you have to get things done NOW, then maybe you'll need 4WD. Not for me, I just have good tires and chains if I need to be in snow.
So, my suggestion is to go ahead and get one of the old MF, or Ford vintage units. Then, after a year or so of struggle while you shop, get something from the late 60s or mid 70s. My next tractor will be a Ford 3000 diesel with split 4 trans or 10sp, and a FEL. I already know what I want, and just going to wait until the right one shows up. I'm going to pay $5-7000 for it, and take care of it like it will last the rest of my life.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Earthmaster Project Progress Just a little update on my Earthmaster......it's back from the dead! I pulled the head, and soaked the stuck valves with mystery oil overnight, re-installed the head, and bingo, the compression returned. But alas, my carb foiled me again, it would fire a second then flood out. After numerous dead ends for a replacement carb, I went to work fixing mine.I soldered new floats on the float arm, they came from an old motorcycle carb, replaced the packing on the throttle shaft with o-rings, cut new ga
... [Read Article]
Latest Ad:
Nice Marvel Schebler DLTX 8 bronze body carburetor For 1934-1936 unstyled A tractor.Serial No.410000-42850. All restored and ready to use.
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
