Tractor Talk Discussion Board |
Re: What's the difference between cast iron and steel ???
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Farmer Tim on October 18, 2001 at 17:45:28 from (64.152.159.228):
In Reply to: What's the difference between cast iron and steel ??? posted by Just Wondering on October 18, 2001 at 06:00:18:
The difference between cast iron and and steel is simple: carbon content. Steel is iron with more than 0% carbon but less than 2% carbon. Most steel contains more than 90% iron and has between 0.15% and 1.0% carbon. Most types of cast iron contain 2% to 6% carbon and small amounts of silicon. Wrought iron contains essentially no carbon. At approximately 6% carbon, it is relatively useless because it is so brittle. In the AISI/SAE numbering system, the last two digits refer to the percentage of carbon in the steel. For instance, 4140, means that the carbon content is .40% . Steel is iron with the carbon in solution. Cast iron is iron in which some of the carbon has precipitated out and appears as flakes ( gray cast iron, the most common ) or little spheres ( nodular ). Gray cast iron is more brittle than steel, and has poor tension strength. However, it is a good material to withstand high compression loads, resist wear, and is easy to machine. Hope to have answered some questions and sorry to get so technical, but I'm a Mechanical Engineer and this is my job...
Follow Ups:
Home
| Forums
Today's Featured Article -
Engine Valves - Some Helpful Information - by Staff. Intake - On the intake stroke the piston moves doward, sucking in carburized fuel through the open intake valve. Exhaust valve is closed. Compression - With both the intake and exhaust valves closed, the pistons upward stroke compresses or squeezes the fuel into the combustion chamber. Firing - Ignited by the spark, the compressed fuel explodes and forces the piston downward on its power stroke. Intake and exhaust valves are closed. Exhaust valves and seats are exp
... [Read Article]
Latest Ad:
18-32 Case Cross Motor
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|