|
Tractor Talk Discussion Board |
Re: Re: Balancing Tires With Golf Balls
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by magic balls on November 28, 2003 at 11:38:16 from (66.157.81.145):
In Reply to: Re: Balancing Tires With Golf Balls posted by MarkB on November 28, 2003 at 05:19:50:
Mark while I was going to leave it with Allan's answer I figured I would let the cat out the bag.
See a spinning object will always try to balance it self. Think about it a minute. If you take a pan of water and spin it on a center point. Water will be forced to outside. (right) Will it all run to one side? No. Centrifugal force will send a even amount of water in all directions balancing it.
See the tire is unbalanced and jumping up and down. Every time the heavy side of the tire gets to the top it makes the tire jump up. The balls or what ever you put in tires moves around until it gets to the light side of the tire counter balancing it then stay there till you stop.
Water is a better thing to use as it is not as abrasive as a hard object on the inside of the tire but anything will work even a hand full of rocks. Hard objects play he## with any patches or plugs you may have in tire.
They make a ring that is a hollow tube with metal balls in it. It is the size of the rim and bolts between the drum and rim that does the same thing.
Follow Ups:
Home
| Forums
Today's Featured Article -
Engine Valves - Some Helpful Information - by Staff. Intake - On the intake stroke the piston moves doward, sucking in carburized fuel through the open intake valve. Exhaust valve is closed. Compression - With both the intake and exhaust valves closed, the pistons upward stroke compresses or squeezes the fuel into the combustion chamber. Firing - Ignited by the spark, the compressed fuel explodes and forces the piston downward on its power stroke. Intake and exhaust valves are closed. Exhaust valves and seats are exp
... [Read Article]
Latest Ad:
18-32 Case Cross Motor
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
