Tractor Talk Discussion Board |
Re: 5 out of 6
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by RAB on February 16, 2006 at 14:01:40 from (195.93.21.6):
In Reply to: 5 out of 6 posted by billybunter on February 16, 2006 at 12:34:10:
Right. There will soon be a worn bore if you are injecting deisel and it is not burning. First swap the injector with another to determine whether it is the cylinder or the injector (assuming valve clearances are all OK). Next, if miss moves with injector, rectify same, or if it is the cylinder find out why - gasket, valve(s) bad, rings. A compressed air test should indicate where compression is lost if that is the problem. Severe crankcase breathing will also be evident if all compression is going to the bottom end. Check valve lifts on the bad cylinder as a cam lobe may be shot. Get back to us with your findings, so we can stop worrying about your problem or suggest the next move from wherever you are at. Regards, RAB
Replies:
Home
| Forums
Today's Featured Article -
Engine Valves - Some Helpful Information - by Staff. Intake - On the intake stroke the piston moves doward, sucking in carburized fuel through the open intake valve. Exhaust valve is closed. Compression - With both the intake and exhaust valves closed, the pistons upward stroke compresses or squeezes the fuel into the combustion chamber. Firing - Ignited by the spark, the compressed fuel explodes and forces the piston downward on its power stroke. Intake and exhaust valves are closed. Exhaust valves and seats are exp
... [Read Article]
Latest Ad:
18-32 Case Cross Motor
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|