Farmall & IHC Tractors Discussion Board |
Re: Water pump packing
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by John In Iowa on March 27, 2004 at 07:36:11 from (199.108.164.17):
In Reply to: Water pump packing posted by CNKS on March 26, 2004 at 17:36:38:
Putting packing in a pump can be channeling. Too loose and it leaks, too tight you will burn the packing and the shaft. Packing has to leak a little just to keep it lube and keep it from burning. The object is to have it leak with the grease instead of water. After installing new packing keep the nut loose (Tighter than finger tight but no more than about 20 foot pounds.) and add small amount of grease and keep tightening the packing little by little while running the engine in between until your leaking stops. If you over tighten you will burn the packing and shaft. If you over grease, you will move the shaft back through the packing, if the shaft has ridges in it, it will over size and tear the packing were it meet the shaft and which will cause you leaking. No more than a half a shot of grease should do it. This will allow you to seat packing and work out all the voids without burning or tearing the packing. John In Iowa
Follow Ups:
Home
| Forums
Today's Featured Article -
The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|