Farmall & IHC Tractors Discussion Board |
Re: M Clutch Problems
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Andy Martin on March 15, 2005 at 05:20:25 from (64.219.39.195):
In Reply to: Re: M Clutch Problems posted by John M on March 14, 2005 at 15:16:59:
There are six bolts which hold the pressure plate to the flywheel. There are open holes also, which seem to not be of any use. If you take out every other one of the six and put them in the open holes, you can screw them into the pressure plate and ithey will hold the pressure plate back against the pressure plate cover plate, keeping the springs compressed while you take the other three bolts out. Cars and trucks generally don't have these "spring-compression" holes, so you can pull and replace an M pressure plate like you would in a car, but it is convenient to keep the springs compressed help line up everything. It also gives you more room when replacing the clutch without splitting the tractor. Just like the throwout bearing grease zerk and the pilot bearing grease zerk, these old crude tractors have some features not adopted on the more modern equipment.
Follow Ups:
Home
| Forums
Today's Featured Article -
Chores - by Frank Young. The ceaseless passing of time! It is at once our friend and our enemy. It measures our progress and it makes us old. Like most features of our life, few things are all good or all bad, and most such judgments depend on our own perspective or viewpoint. In our particular hobby, we enjoy the nostalgic return to the days of our youth as we recreate many of the scenes that took place on the family farm that served as the stage for the first few acts of the play that is our live
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|