Farmall & IHC Tractors Discussion Board |
H, Engine RPM under load low
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by 230,H,M on March 19, 2005 at 05:01:34 from (4.239.63.198):
When hooked up to a DYNO and a load is placed on the engine the engine does not die. However, after reaching about 1350 RPM the engine does not accelerate to 1650 load RPM. The engine can be loaded to the point that it will stall. Acceleration from idle to full throttle with no load is very good. Here is what has been done so far. Complete new ignition system. Wires (copper), plugs 3116's, Coil no external resistor required type, IH points condenser and rotor and cap. Carburetor clean as a whistle. All orifices open. Adjusted according to IH specs. Governor has new spring and is adjusted according to IH instructions. I do note that the fly weight pivot holes are worn some though. Compression is 105 to 110 all cylinders with engine at operating temp. New fuel line, and tank is clean. Sediment bowl and screen is clean. Have any of you experienced this problem? What did you do to fix it? Thank you
Follow Ups:
Home
| Forums
Today's Featured Article -
Chores - by Frank Young. The ceaseless passing of time! It is at once our friend and our enemy. It measures our progress and it makes us old. Like most features of our life, few things are all good or all bad, and most such judgments depend on our own perspective or viewpoint. In our particular hobby, we enjoy the nostalgic return to the days of our youth as we recreate many of the scenes that took place on the family farm that served as the stage for the first few acts of the play that is our live
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|