Farmall & IHC Tractors Discussion Board |
Re: 48 Cub won't fire
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by WOD on May 23, 2005 at 12:14:32 from (63.126.250.163):
In Reply to: Re: 48 Cub won't fire posted by old on May 22, 2005 at 11:56:25:
Well, Here is where I am. I now have spark at the plugs. The plugs are old..so I'm going to replace them. It still won't start. I want you guys to double check my procedure here: 1) pulled the rotor button off. 2) pulled the plate off (has a little gear in it) off that covers the points. 3) cleaned them and noticed a mark on the little gear. Timing mark I guess. 4) well, there was no mark on the rotor button gear. But on the outside of the rotor button there is what looked like a mark to me. So I matched that up with the little gear mark and put it back together. At least now I have spark. My question is, Did I do the timing procedure correct? Thanks, WOD
Follow Ups:
Home
| Forums
Today's Featured Article -
The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|