Farmall & IHC Tractors Discussion Board |
Re: 12V Alt. for SA with Water Pump?
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by Hugh MacKay on May 18, 2006 at 01:23:53 from (216.208.58.189):
In Reply to: 12V Alt. for SA with Water Pump? posted by Jack in Ohio on May 17, 2006 at 17:40:59:
Jack: If you put a double alternator pulley from 1980s GM V8 engines, it gives you space needed. By using the outer pulley this allows you to move the alternator back just enough to clear. On my tractor I just welded a flat plate on old generator mount and welded two tabs on plate for alternator mounting bolt to go through. Give yourself enough space to put a couple of washers between tabs and alternator, it gives you a chance to align belt better. Basically my alternator sits on that flat plate. My alternator also sits in within 1/2 of engine block with belt tight. I had to change the belt to one about 1" shorter. If you want to e mail me I should have a decent photo scanned of this. I did SA, 130 and 140 all the same way, thus the photo you get may not be SA but they are all the same.
Replies:
Home
| Forums
Today's Featured Article -
The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|